Escalade Taillights installed on 2015 Tahoe

Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.

dbbd1

Full Access Member
Joined
May 12, 2017
Posts
924
Reaction score
354
Also - wouldn't a trailer light converter work in order to get the brake light and turn signals separate? I remember doing this in my past life when I had a ZX6R. The break and turn were one wire and we used a trailer harness to separate the turn and brake in order to add individual amber turns on the back of the bike and keep the brake lights solid while stopping.


I was thinking the same thing too. But, by the time all was said and done, wiring up from the front turns may be just as easy.
 

fozzi58

Full Access Member
Joined
Jun 2, 2017
Posts
369
Reaction score
269
Location
North Jersey
I was thinking the same thing too. But, by the time all was said and done, wiring up from the front turns may be just as easy.

I don't disagree except that you need to drag a wire from the front blinker on each side to the back of the truck. That is PITA. I'd much rather use a trailer splitter on each side. Adding $30 to the cost for simplicity and keeping things "self contained" as best as possible would be much better.
 

lilmac

Member
Joined
Jun 23, 2016
Posts
58
Reaction score
9
Installed used OEM tail lights on my 2015 Yukon SLE XL past weekend. Straight plug and play. Have people doing double takes. Only issue I have is that there are no reflectors in the tail light housings facing the rear of the vehicle. If your vehicle is parked in a dark area, cars approaching from the rear may not see your vehicle. I notice on the Escalades, the reflectors are in the bumper. Wonder if the Escalade bumper is a straight bolt on. Would take care of reflector issue and that slight overhang the tail lights have on the Yukon bumper.
 

TravisRyans

TYF Newbie
Joined
Jun 2, 2017
Posts
7
Reaction score
1
Installed used OEM tail lights on my 2015 Yukon SLE XL past weekend. Straight plug and play. Have people doing double takes. Only issue I have is that there are no reflectors in the tail light housings facing the rear of the vehicle. If your vehicle is parked in a dark area, cars approaching from the rear may not see your vehicle. I notice on the Escalades, the reflectors are in the bumper. Wonder if the Escalade bumper is a straight bolt on. Would take care of reflector issue and that slight overhang the tail lights have on the Yukon bumper.


Could you post a few pictures? I'm considering doing this to my 2015 yukon xl that I just picked up a few weeks back. Also, where did you find you OEM escalade lights/price?
 

lilmac

Member
Joined
Jun 23, 2016
Posts
58
Reaction score
9
Could you post a few pictures? I'm considering doing this to my 2015 yukon xl that I just picked up a few weeks back. Also, where did you find you OEM escalade lights/price?

I bought them off eBay. Different seller for each side. I think I paid $250 for one and $260 for the other. So basically for the price of the cheap knockoffs, I got genuine tail lights. Be patient and you will find **** Escalade owners selling because of very minor scratches. Mine have very, and I mean very minor scratches. Couldn't spot unless pointed out. I will post pics tomorrow when it's light out.
 

gat0r

Full Access Member
Joined
Dec 11, 2015
Posts
3,106
Reaction score
5,828
Location
DFW
@lilmac

looks sweet



i may be able to live w/ overhang of lights , like that.
might hav to add these to my burb, after i lower it more.
 

lilmac

Member
Joined
Jun 23, 2016
Posts
58
Reaction score
9
They may not be plug and play for the suburban from what I've heard. May be possible with a lot of headache.
 

gat0r

Full Access Member
Joined
Dec 11, 2015
Posts
3,106
Reaction score
5,828
Location
DFW
^ yeah , they wont be PnP.
turn signals wont work w/o extra wiring & such (or trailer adapter)
 

Forum statistics

Threads
128,664
Posts
1,802,927
Members
91,574
Latest member
korzone

Latest posts

Top