bottomline2000
Full Access Member
People fail to realize that body damage cost $$$ to fix..file an insurance claim on her and see if she says so what. Little dents and stuff can be $400 to fix.
Sent from my SAMSUNG-SM-T377A using Tapatalk
What did you do to your NBS GMT800 Tahoe/Yukon Today?
- Thread starter vwbeaner
- Start date
Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.
Sent from my SAMSUNG-SM-T377A using Tapatalk
05Single
afraid of the dark
- Joined
- Feb 26, 2015
- Posts
- 8,183
- Reaction score
- 11,447
Not to mention deductibles. $25, $500,...... $1,000.
W8TVI
Full Access Member
So last night I tried some STP son of a gun on my rear vent covers:
Came out so shiny you can see yourself in it.
This is what I came out to today:
Looks like rain will wash most of it right off.
So don't bother with STP S.o.a.G. Still works good on regular interior plastics.
Came out so shiny you can see yourself in it.
This is what I came out to today:
Looks like rain will wash most of it right off.
So don't bother with STP S.o.a.G. Still works good on regular interior plastics.
MadDogDelpho
Texcellent
Mechanic quoted me $974 for the abs control module. Says it's a dealer part. What do y'all think about that? Sounds like too much to me, but I also don't know the extent of the parts needed.
Tonyrodz
Resident Resident
Seems expensive to me. What about a jy?
95escahoe
Full Access Member
- Joined
- Aug 2, 2010
- Posts
- 5,155
- Reaction score
- 4,452
Seems high for just the part here's one for my truck, yours should be the same price
Sent from my iPhone using Tapatalk
How hard is it to replace, do it yourself? It's 267 at advanced auto plus a 100 core charge so it'll be 367 but bring your old one back and get 100 back
I'd go to www.modulemaster.com and get a rebuilt one for probably $250 or less.
BigDaddy13440
Full Access Member
Had to replace the passenger's side headlight from when a towtruck driver "forgot" to chain down my ass end on a flatbed, and it slid forward when he went to stop. Grille cracked, and the headlight assembly broke. The owner of the garage was cool, got me a like-new assembly, a new grille shell, and a replacement set of 9006 LED headlights.
While I was swapping parts, I remembered that someone on here had disassembled their headlights, and popped the amber marker out. Since there isn't a light assembly behind it, I figured "why not?"...
Now I've got to look for the lower light assembly in an all-clear version, will find amber LED's to fit in them.... might even use some of the 18mm Blue LED's I have, put one in each corner where the amber lenses were.
EDIT:
thinking about clear lights, got searching E-bay - which do you guys think would look better?
Black housing/smoked lens?
Or black housing/ clear glass?
Or Chrome/ clear glass?
And plan on adding the red/clear taillights:http://www.ebay.com/itm/00-06-Chevy...e=STRK:MEBIDX:IT&_trksid=p2055119.m1438.l2649
While I was swapping parts, I remembered that someone on here had disassembled their headlights, and popped the amber marker out. Since there isn't a light assembly behind it, I figured "why not?"...
Now I've got to look for the lower light assembly in an all-clear version, will find amber LED's to fit in them.... might even use some of the 18mm Blue LED's I have, put one in each corner where the amber lenses were.
EDIT:
thinking about clear lights, got searching E-bay - which do you guys think would look better?
Black housing/smoked lens?
Or black housing/ clear glass?
Or Chrome/ clear glass?
And plan on adding the red/clear taillights:http://www.ebay.com/itm/00-06-Chevy...e=STRK:MEBIDX:IT&_trksid=p2055119.m1438.l2649
Last edited:
MadDogDelpho
Texcellent
See I haven't got a clue what all needs to be replaced though. It might be both parts, which explains that price. I'm taking it to another mechanic tomorrow.
