aFe intake install on 2017 - issues

Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.

hundhaus

Full Access Member
Joined
Mar 24, 2015
Posts
139
Reaction score
88
Location
Wyckoff NJ
I tried to install tho sin take on my 2015 Denali XL and even after removing the cross bar support I still could not get the air box to fit correctly. After hours of frustration I decided to return it and go with a K&N Black. Not what I wanted to do but for the money I should not have had the fitment issues I had.
 
OP
OP
B

BluVelvet2xHo

TYF Newbie
Joined
Jan 15, 2017
Posts
24
Reaction score
9
Location
Omaha, NE
Just to finalize my thoughts on the aFe CAI, it's very difficult to install in the 17 models for some reason. I did remove both cross bars to install plus I left that removable pin from the stock air box out of the new one. The molded pins are good enough for holding the box once it's all put together. Using the PLUG in the front definitely helps keep the growl to a minimum & actually tones it down considerably.

Thanks to those who advised, shared pics & thoughts. Makes all the difference when you get some help.
 

OCyukon

TYF Newbie
Joined
Feb 27, 2017
Posts
19
Reaction score
3
Location
Orange County, CA
Just to finalize my thoughts on the aFe CAI, it's very difficult to install in the 17 models for some reason. I did remove both cross bars to install plus I left that removable pin from the stock air box out of the new one. The molded pins are good enough for holding the box once it's all put together. Using the PLUG in the front definitely helps keep the growl to a minimum & actually tones it down considerably.

Thanks to those who advised, shared pics & thoughts. Makes all the difference when you get some help.

AFE just used my vehicle to test fit the 2017 and confirmed the momentum does not fit. They used my vehicle to prototype the new momentum kit and should have a new part in approximately 8 weeks. I am running the Stage 2 in the mean time and it is really loud
 

ctide21

Member
Joined
Oct 30, 2014
Posts
37
Reaction score
22
Did they say what changed under the hood for why it doesn't fit. I have 2017 Denali as well and looking forward to the new momentum kit.
 

OCyukon

TYF Newbie
Joined
Feb 27, 2017
Posts
19
Reaction score
3
Location
Orange County, CA
Did they say what changed under the hood for why it doesn't fit. I have 2017 Denali as well and looking forward to the new momentum kit.
The hole where the feet snap into in the inner fender are in different locations and the lid hits the support bar on the top.
 
OP
OP
B

BluVelvet2xHo

TYF Newbie
Joined
Jan 15, 2017
Posts
24
Reaction score
9
Location
Omaha, NE
The hole where the feet snap into in the inner fender are in different locations and the lid hits the support bar on the top.
Sounds about right OCyukon. I made it work but it was probably tighter than usual. Hope they put the new one out that soon cuz I'm sure some would like to buy it. I'll stick with this one unless they want to send me a free one to test fit. ;)
 

ctide21

Member
Joined
Oct 30, 2014
Posts
37
Reaction score
22
Any update from AFE on when the momentum will be ready for the 2017
 

Forum statistics

Threads
128,665
Posts
1,802,934
Members
91,575
Latest member
Beat Ta hoes
Top