Denali vs Std Yukon Light Output

YukonXL04 · Feb 4, 2017

That's much better. Actually shows something. However look how much light is above the front end. That looks very blinding for oncoming drivers. Hows the width?

I understand the ease of just swapping bulbs, but why not just do a retrofit and be done?

I'm not trying to be rude, I reread my first post and saw it came off that way, I apologize.

NathanJax · Feb 4, 2017

BigDaddy13440 said:
Simple LED swap is all you need, UNLESS you really want to change the look and go with the depos.

BigDaddy13440 said:
These better?????

Fogs and lows

This is the exact reason NOT to just throw LEDs or HIDs in a non HID/LED projector housing. If you look at my cut off line picture below, you can see how none of the light is blinding oncoming drivers. Every bit of light is being used on the road. In your picture, this is no cutoff. You are blinding oncoming traffic...

DDenali · Feb 4, 2017

BigDaddy13440 said:
These better?????

Fogs only
View attachment 73957
Fogs and lows
View attachment 73958
Fogs Lows and highs
View attachment 73959
Fogs, lows, highs and light bar
View attachment 73960

Light bar only
View attachment 73961

Looks awesome

Sent from my iPhone using Tapatalk

BigDaddy13440 · Feb 5, 2017

NathanJax said:

Actually, I'm NOT blinding traffic. I'm friends with a few cops locally, and they have said that my lighting is directed low enough so that the hot spot isn't in their eyes. Could be that I'm parked on a very slight grade here, it may seem worse than it actually is.

My previous pictures were out on an open highway, again, not as bad.

hi-tech redneck · Feb 9, 2017

BigDaddy13440 said:
Actually, I'm NOT blinding traffic. I'm friends with a few cops locally, and they have said that my lighting is directed low enough so that the hot spot isn't in their eyes. Could be that I'm parked on a very slight grade here, it may seem worse than it actually is.

My previous pictures were out on an open highway, again, not as bad.

Howdy Big D,
I like your lighting setup.
I read where you mention buying these lights from eBay.

Do you remember the seller and the lights part #?
You mind sharing?

Thanks
HtRn

BigDaddy13440 · Feb 9, 2017

hi-tech redneck said:
Howdy Big D,
I like your lighting setup.
I read where you mention buying these lights from eBay.

Do you remember the seller and the lights part #?
You mind sharing?

Thanks
HtRn

http://www.ebay.com/itm/302143354059?_trksid=p2057872.m2749.l2649&ssPageName=STRK:MEBIDX:IT

http://www.ebay.com/itm/291948044723?_trksid=p2057872.m2749.l2649&ssPageName=STRK:MEBIDX:IT

http://www.ebay.com/itm/32INCH-300W...P-30-WIRING-/131937228587?hash=item1eb812572b

http://www.ebay.com/itm/6X-36W-SPOT...4X4WD-TRUCK-/282143710522?hash=item41b1135d3a

Denali vs Std Yukon Light Output

YukonXL04

The Riverboat

NathanJax

Vacation Nathan

DDenali

Full Access Member

BigDaddy13440

Full Access Member

hi-tech redneck

TYF Newbie

BigDaddy13440

Full Access Member

Similar threads

Forum statistics

Latest posts