22" offset. Confused after searching

Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.

nharkey85

Full Access Member
Joined
May 24, 2015
Posts
282
Reaction score
112
Location
Alabama
i know there are differences between the NBS and NNBS, but on my NBS i have 22x9 +31mm offset replicas with 275/45/22 tires (1.1" taller than stock, for my 2005). im lowered 3-6 with the DJM lowers which narrow the track width up front close to .75" each side. i rub the sway bar on either side when nearing full lock in reverse, and a little bit of the inner fender on the driver side (all rubbing occurs on the inner side, presumably due to the djm arms. i was lowered 2-3 (McG spindles) when i got the wheels and dont recall any rubbing at that point

@massivespl's suggestion of 305/40/22 is just less than an inch wider than my 275s, but similar overall diameter. the extra width wouldnt cause that much more rubbing in my case. either of our tire sizes should work fine

offset wise....id go +38mm. you can always add a spacer to push a wheel out some. you'd have to get new wheels (or lift/level) if they stick out too far
 
Last edited:

Forum statistics

Threads
128,801
Posts
1,805,626
Members
91,784
Latest member
navyboy14094
Top