Nnbs intake swap question

Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.

OP
OP
J

JakeO625

TYF Newbie
Joined
Apr 16, 2016
Posts
26
Reaction score
2
The intake manifold is an upgrade. I have read about occasional failures with the xlink.

from the link already posted in this thread:

So for my 6.0 do I need an 07+ 5.3 or 6.0 intake or does it not matter?
 
OP
OP
J

JakeO625

TYF Newbie
Joined
Apr 16, 2016
Posts
26
Reaction score
2
Awesome I appreciate all the responses guys. I'll update the post with pics whenever everything is installed.
 

hoe

Full Access Member
Joined
Nov 24, 2009
Posts
696
Reaction score
17
Some miss info here.
Yes the nnbs intake is a upgrade similar to the trailblazer ss intake. Yes there good for about 20 hp and more if you have a power adder or supporting mods. That's pretty good Bolton. Injector rails needs to be custom on crossover or return systems. I would stick drive by cable with big throttle body. Be sure you have a intake that matches your cathedral heads. 6.0 nnbs has square heads. 5.3 is cathedral but same size intakes..

I sold my 6.2 heads and intake. Going with a custom blower intake.
 

05Single

afraid of the dark
Joined
Feb 26, 2015
Posts
8,183
Reaction score
11,447
Some miss info here.
Yes the nnbs intake is a upgrade similar to the trailblazer ss intake. Yes there good for about 20 hp and more if you have a power adder or supporting mods. That's pretty good Bolton. Injector rails needs to be custom on crossover or return systems. I would stick drive by cable with big throttle body. Be sure you have a intake that matches your cathedral heads. 6.0 nnbs has square heads. 5.3 is cathedral but same size intakes..

I sold my 6.2 heads and intake. Going with a custom blower intake.
So a tbss should match my 5.3 heads ?
 

Spencer_waynee

Full Access Member
Joined
Oct 26, 2016
Posts
182
Reaction score
86
Getting ready to do mine from what I've collected pretty straight forward all I have left to buy is the little eVap solenoid and the c5 filter

IMG_0354.JPG

IMG_0528.JPG
 

Spencer_waynee

Full Access Member
Joined
Oct 26, 2016
Posts
182
Reaction score
86
And im using the fuel rail and injectors that are already on the intake..
 
Top