Recent content by quicksilver

  1. quicksilver

    6" BDS Lift

    Absolutely. If you read the fine print on Fabtech, you will find it says (somewhere in small print) minor trimming required. ...and it is.
  2. quicksilver

    6" BDS Lift

    I have an XL so that may be a little different for you.
  3. quicksilver

    6" BDS Lift

    Fabtech is like 6'10.5" at the roof rails. With 35s you will have tire clearance issues guaranteed. Also, I don't even try a parking garage unless it is >7'.
  4. quicksilver

    Spacer on Stock Wheel

    I run them on front and rear. Sent from my SAMSUNG-SM-G891A using Tapatalk
  5. quicksilver

    Lifting a '17 Denali

    What lift? Sent from my SAMSUNG-SM-G891A using Tapatalk
  6. quicksilver

    6"+ Lift Anybody?

    I think you can go with an aftermarket longer shock and put a resistor some where in the shock harness to trick the computer into thinking it is there still. Google is your friend.
  7. quicksilver

    6"+ Lift Anybody?

    There are shock/strut extendions and adaptor brackets for the mag ride sensors. Sent from my SAMSUNG-SM-G891A using Tapatalk
  8. quicksilver

    Need wheel suggestions for 6" lifted 2016 Denali XL

    I completely forgot about Weld! Thanks for the suggestion. I'll check it out.
  9. quicksilver

    Need wheel suggestions for 6" lifted 2016 Denali XL

    Ok, I can't pick out a wheel. Definitely need to stay with 22" because of my relatively new tires. Suggestions? So far on my list are: Helo HE901SB, VRock Recoil X, Moto Metal MO983...
  10. quicksilver

    What lifts work with mag ride? 4-6" kits

    It sits level without the trailer. With the trailer, it only sits about 1" lower thanks to the air ride. The photo makes it look like more.
  11. quicksilver

    What lifts work with mag ride? 4-6" kits

    325/50/22 (34.84" high) with 1.5" spacer in front and 2" spacer in rear. The rear measures 1/2" narrower than the front with the lift installed.
  12. quicksilver

    What lifts work with mag ride? 4-6" kits

    The McGauhy's kit looks about the same as my Fabtech. If you are going to run 35s, then I would go for the 7" lift vs the 6". The extra 1" in the front would mean less fender/running board/bumper/air dam trimming. Is there really a 1" difference? Who knows?
  13. quicksilver

    What lifts work with mag ride? 4-6" kits

    Maybe this one will.
  14. quicksilver

    What lifts work with mag ride? 4-6" kits

    No. Never has either. The kit has new mounts for the sensor arms. The computer can't even tell the lift is there.
  15. quicksilver

    What lifts work with mag ride? 4-6" kits

    Fabtech 6" works on my '16 Denali.
See more

Forum statistics

Threads
129,270
Posts
1,813,070
Members
92,374
Latest member
fishcop076

Latest posts

Top