Is the hood still available? It looks decent in the first post. Any damage or failing clear coat?
I'm not that far away in MA, and could come down and grab it if it's still there and in bolt on condition.
-mals
Are you also looking at Facebook Marketplace listings in your area? As much as I don't like FB, the use of the market place as a classified section is really starting to replace the use of Craigslist in my area. A quick search for listings around Everett, WA shows a ton of NBS and a handful of...
It looks like you already received some good information, but I wanted to add my experiences since they may be relevant. I purchased my 2005 6.0L AWD Yukon Denali specifically to tow our Gulfstream AmeriLite 21MB. Like yours, mine has a max tow capacity of 8,100lbs, front axle rating of...
I agree with both of the points. I purchased my Yukon with 156K and no maintenance history. It had its issues that I could see when I bought it. Over the next year I tackled those repairs one at a time in order of safety, scheduled maintenance, and then performance. Most of those were...
I find the MPG / Gallons Used readings in the DIC to range from spot on to widely off for any given tank. The best way to figure it out is to track your mileage and fill ups at the pump. I use Fuelly.com to track the fuel usage for all my vehicles. You might want to track a few tanks to see what...
I'm still using the stock paper filter, so the MAF shouldn't be fouled with any oil. However, I may may pull the MAF and the MIT to check both. Can't hurt to clean the MAF and make sure the MIT is properly seated on the TB. If that doesn't do it I'll try 02 sensors, and then move on from there...
Spark plugs were replaced 9k ago when I bought it, but I didn't replace the wires or coils at the time. They all looked good and I needed to put the money elsewhere when I was getting it fit for the road.
Hmmm, I did install an Airaid MIT tube last spring a few months before I started getting these codes. I don't think I read any reviews of the MIT that mentioned issues after install. I wonder if it was enough to reveal another issue that was hidden (MAF, intake gasket, or O2 sensor).
Thanks for the info, but the downstream ones are $10 less each then the upstream ones. If I'm going to be under there fighting them out of the exhaust I'd rather just lose one day to the project than a second one down the line. Also, I think the conventional wisdom with 02 sensors is if one...
So over the past few months these three codes have popped up occasionally. Generally after 1-2 hours of highway driving. Sometimes it's just one of the lean condition codes, other times just the random misfire. Driving from MA to NJ after Christmas about an hour in I got the P0300 code, pulled...
In the glove box there should be a sticker that looks like this:
Look for one of the following engine RPO codes:
4.8 - LR4
5.3 - LM7, L59
6.0 - LQ4, LQ9
Well, there's your problem. ;)
I have a 6.0L AWD and average 16 on the highway, 13 around town (all 35 mph or less), and 10mpg when towing my travel trailer. If you are seeing single digits regularly with a 5.3L, and don't have driving habits that would explain it, I agree it might be worth...
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.