Recent content by Jukon

  1. J

    4L60E torque converter to flexplate gap

    Turns out the 1/2" gap is normal. I installed the transmission and it works great.
  2. J

    Steel Wheels

    Turns out nobody makes 18" steel wheels.
  3. J

    Does this Ford Sterling have Limited Slip?

    Turns out it doesn't. It's an open differential.
  4. J

    How to fix Hot Air when A/C is on. Install new air mix/blend door actuator

    Watch this:
  5. J

    Does this Ford Sterling have Limited Slip?

    Hi, I'm not very familiar with differentials. Is this an open diff? LSD? Thanks! More pics here: https://imgur.com/a/iv030
  6. J

    Steel Wheels

    The only reason I want the 18" is because I can get a deal on 37" tires for 18" wheels. Otherwise I'd just go with the more common 16" or 17" 8 lug wheels.
  7. J

    Steel Wheels

    Hi, does anyone know where I could get a used set of 18" steel wheels or inexpensive wheels? I need 18" wheels that are between 8" and 11" wide. Bolt pattern is 8 lug by 6.5". Any ideas? I've had no luck on Craigslist or Ebay.
  8. J

    How to fix Hot Air when A/C is on. Install new air mix/blend door actuator

    Thanks a LOT for this post. This fixed my AC problem! I knew my compressor was spinning, my low pressure AC line was freezing cold, the blower was on, and yet no cold air. I swapped this out and bam, cold air. Thanks again.
  9. J

    SAS Brake Upgrade?

    Hi, I have a 1996 GMC Yukon 4WD 5.7L. It has a Dana 60 solid axle swap which has disc brakes. I'm running 37" tires. Right now I don't think the brakes can lock up the front tires. What is the easiest and most inexpensive thing I can do to improve the brakes? Larger brake booster? Larger...
  10. J

    4L60E torque converter to flexplate gap

    Hi All, The tranny came from a 1996 Chevy Tahoe (1-piece K case). I had to remove the tranny from my Yukon again because of the leak. I took it to a tranny shop and the guy resealed the front pump and replaced the bushing. I purchased a new torque converter as the one I had was scored on...
  11. J

    4L60E torque converter to flexplate gap

    Hi, I am replacing my 4L60E transmission. A friend and I removed the original transmission. I didn't remove the torque converter from the flexplate (my friend did) and so don't know what the original gap was between the two when the converter was pushed back into the transmission for removal...
See more

Forum statistics

Threads
129,120
Posts
1,810,761
Members
92,207
Latest member
2DoeProjectHoe

Latest posts

Top