Recent content by Dannydean

  1. Dannydean

    07 6.2L oil pressure sensor screen

    Oil pressure looks good My 07 Denali had a screen, and when removed it was a little twisted from the sensor pushing down on it. So if I had to guess you didn't have one. Also I used a small 90 degree pick to remove it. Actually I dont think you need it, since you don't have afm
  2. Dannydean

    Mobile electronics specialist at your service.

    I would guess the bombardment of questions. You ask and you shall receive. And welcome to the forum.
  3. Dannydean

    For those who have done AFM delete/cam swaps

    Hopefully, working the throttle and the brake you can get it on the trailer
  4. Dannydean

    For those who have done AFM delete/cam swaps

    I usually use a impact gun. But u will have to figure out how to lock it down if you want to retorque the cam bolts during install. Also the vvt is 2 pin the cam sensor is 3 pin and the both of them join together to make up the 5 pin (down by the oil pan area. I believe). But with the...
  5. Dannydean

    For those who have done AFM delete/cam swaps

    You have got vvt and afm / dod crossed up I believe. Vvt - variable valve timing Afm or DOD - which ever you want to call it is - 4 cylinder mode All 6.2 / l92s have vvt. And the early ones had the afm hardware ; but wasnt activated. Smooth valley cover = no afm hardware
  6. Dannydean

    Broken Intake Valve from Valve Float 6.2L L92?

    Not sure what all the benefits are but I have heard they were better than the tensioner style that have been know to break. That that's the question I have also. after installing the new cam would it be driveable enough to get to the tuner?
  7. Dannydean

    Broken Intake Valve from Valve Float 6.2L L92?

    Is the stage 2 cam a one or three bolt camshaft ? Vvt delete ? I've been debating on the camshaft swap, and also dont want to get in to a bigger stall. I want it to pull from Down low like it does now. It seems like the rpm's hang around 1500 to 2000 just normal driving. It's my...
  8. Dannydean

    Obd2 dongle for torque app

    From what I gather, the adapter needs to have the elm chipset. Ya know i went and bought the bluedriver adapter after looking at a few reviews. Not knowing that it wasnt compatible with the torque software. Live and learn I guess.
  9. Dannydean

    Obd2 dongle for torque app

    I wanting to buy a wireless obd dongle to run the torque pro app. I know there are some low end units out there. But also seen a couple that has a faster read speed. Just curious what everyone is using or recommend.
  10. Dannydean

    whistle noise coming from under dash when applying brakes

    If I had to guess, I'd say your brake booster is bad. Does the engine stumble a little when you apply the brake while sitting still?
  11. Dannydean

    Elite Engineering E2-X Catch Can with Clean Side Oil Separator - $250

    Interested. Just wondering what year this came off of. And if there would be anything else needed to install on my 07 denali.
  12. Dannydean

    Upstream vs Downstream O2 Sensors

    The plugs are ac delco 41-110. As far as the tune goes. It was more than a slight difference. The over all drivability is excellent. But the main Reason I got the personalized tune was because of the mods I had. I didn't want to be running lean. But the plugs look the same, before...

Forum statistics

Threads
128,801
Posts
1,805,612
Members
91,783
Latest member
Banjomatic
Top