Rear defrost problem

Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.

Boyntonx2

Full Access Member
Joined
Dec 5, 2013
Posts
135
Reaction score
23
Location
berlin, nh
I have an 07 suburban and on the rear glass on passenger side where the wire connects to the glass it has broken off. Can I just solder that back on? Or do I have to replace the glass?
Thanks in advance

---------- Post added at 05:40 PM ---------- Previous post was at 05:28 PM ----------

Ok nevermind. After searching the Tahoe forum I found the answer
 

chef choy

Full Access Member
Joined
Nov 20, 2013
Posts
85
Reaction score
6
I had that happen to me once, I took it to my local windshield shop, and they had a metallic adhesive, and stuck it back on. He said that he couldn't guarantee that it would work, but would be better to try than buy a new back glass. I had only 1 of the wires that runs through the glass not work...........I decided that I could live with that, as a new back glass was like 400 bucks.
 
OP
OP
Boyntonx2

Boyntonx2

Full Access Member
Joined
Dec 5, 2013
Posts
135
Reaction score
23
Location
berlin, nh
Yeah I'm gonna wait for warmer weather to try an re weld it. I'll just deal with it not working if I have to unless I find a good deal on new glass
 
Top