LED light bar in the front valence?

seven9st surfer · Feb 9, 2015

Well, I replaced the crankshaft position sensor (getting the starter out of the way was a PITA), and still no luck. Turns over all day, but just won't fire and it's not throwing any codes. Getting a tow to the shop, so I'll have to wait a few more days to test out my new lights. This sucks. Only other thing I can think of that it might be is the fuel pump, or some random electrical grounding issue.

2003denali26 · Feb 9, 2015

I need to see this single row in the valance haha, I went to my buddy's place today and the led bar he has is a 20" double row but its all flood reflectors :wtf:

so I will just order one from eBay, but really want to see output of that single before I pull the trigger here is a mock of were the double will go if I go grille route, the front of the bar will be even with the grille so will look cleaner just a mock tho.

2003denali26 · Feb 9, 2015

seven9st surfer said:
Well, I replaced the crankshaft position sensor (getting the starter out of the way was a PITA), and still no luck. Turns over all day, but just won't fire and it's not throwing any codes. Getting a tow to the shop, so I'll have to wait a few more days to test out my new lights. This sucks. Only other thing I can think of that it might be is the fuel pump, or some random electrical grounding issue.

Check your fuses, might be a blown fuse that keeps re arching then starts fine till it re arch's and disconnects again, take a test light to both sides in the fuse box......... shops are expensive haha

LabGeek24 · Feb 11, 2015

2003denali26 said:
Regular 20"

is that a dual row or a single row bar in your valence?

2003denali26 · Feb 11, 2015

LabGeek24 said:
is that a dual row or a single row bar in your valence?

dual, valance is trimmed abit

seven9st surfer · Feb 13, 2015

Just got back from adjusting the lights and taking some pictures. I just realized I don't have any during the day yet, I'll throw those up tomorrow. But here' some test shots. Sorry they're blurry, I had to manually focus and lock in the shutter speed for an accurate brightness. Here it is:

Lows

Fogs

Lows and fogs

Lows, highs and fogs

And my reverse LED bars

seven9st surfer · Feb 13, 2015

And what the "Hi-7", as I like to call it, looks like from outside.

2003denali26 · Feb 14, 2015

Looks amazing, excited for the day time pics

SRTH8R · Feb 14, 2015

What he said.

01TX_Tahoe · Feb 15, 2015

Jut put a 24" behind the grill on mine...

EDIT: after driving with it on this morning in the dark, I need to adjust it a little. It's shooting downward just a tad bit too much. I want it upwards more, but may be blinding for oncoming traffic though.

seven9st surfer · Feb 17, 2015

Alright, here are the long-awaited daytime pics.

SRTH8R · Feb 17, 2015

Did you mount it straight to the valance?

seven9st surfer · Feb 17, 2015

SRTH8R said:
Did you mount it straight to the valance?

No, I used some 3" L brackets and mounted them to the bumper using the stock bumper bolts just above the valence

SRTH8R · Feb 17, 2015

Ah Si. Thanks, think this is on the list of I wants.

Angus beefeater · Feb 17, 2015

what size led bars did you use to replace the stock fog lights?

seven9st surfer · Feb 17, 2015

Angus beefeater said:
what size led bars did you use to replace the stock fog lights?

I used the 7", 36w eyourlife light bars. Here's the eBay link

http://m.ebay.com/itm/281533593842?varId=580558066354&txnId=1325289286018

2003denali26 · Feb 17, 2015

seven9st surfer said:
Alright, here are the long-awaited daytime pics.

Definatly doing the led fog light mod, look's soooo clean versus the leaky crappy stock ones, how did you mount the fogs? and pics to show, well done man :roflbow:

LabGeek24 · Feb 17, 2015

can you get some pictures of how you mounted the fogs please sir! ordering some of those fogs! just what i've been looking for!

seven9st surfer · Feb 17, 2015

I made the mounts for the fogs out of angle and band aluminum, basically mirroring the stock mounts. I've actually got to pull them out and paint them, probably this weekend, and I'll post some pics as soon as I do.

schandler88 · Feb 23, 2015

Did you get a chance to get any pictures of your brackets?

What do you think provides more useful light on a daily basis, the big bar or the fogs? Thinking about getting one or the other and cant decide.

LED light bar in the front valence?

Full Access Member

Member

Attachments

Member

Full Access Member

Member

Full Access Member

Attachments

Full Access Member

Attachments

Member

Full Access Member

Semper Fi

Attachments

Full Access Member

Attachments

Full Access Member

Full Access Member

Full Access Member

Member

Full Access Member

Member

Full Access Member

Full Access Member

TYF Newbie

Similar threads

Forum statistics