View Full Version : What I've been up to
shsportsfan12
05-14-2009, 07:08 PM
So, if anyone gives a shit and noticed I haven't been on lately...there's a reason. I stripped everything off the frame of my truck for a fresh start. Still not done, but in 3 days of work I put in 30+ hours with a buddy.
Overall I deem this experience TERRIBLE. Definitely one of the worst things I've done to the truck (in some of eyes, it's the bumper, in mine it's this used pos kit). It's a battered and bruised kit. Looks like it's been raped...by what I don't know. We had to fab up a lot of our own pieces throughout the install. It's still not done, and wont be for quite some time as I have to recoup some cost.
Parts that I need, am making, or need to finish:
Shock hoops (currently has no front shocks)
New U-bolts
New drive shaft
New torsion bars
Get smaller CV bolts
Make new heim steering (old is bent, broken, fucked up, etc)
Alignment
Flip zero rate to push axle back 1.5" instead
Drill out new holes from new compression struts
More painting
....and i think that's it for now.....
So anyways...onto pics...
Before:
http://i87.photobucket.com/albums/k123/shsportsfan12/New%20Lift%20Buildup/FTSBuildup008.jpg
http://i87.photobucket.com/albums/k123/shsportsfan12/New%20Lift%20Buildup/FTSBuildup009.jpg
http://i87.photobucket.com/albums/k123/shsportsfan12/New%20Lift%20Buildup/FTSBuildup010.jpg
http://i87.photobucket.com/albums/k123/shsportsfan12/New%20Lift%20Buildup/FTSBuildup011.jpg
http://i87.photobucket.com/albums/k123/shsportsfan12/New%20Lift%20Buildup/FTSBuildup012.jpg
Rear Suspension parts:
http://i87.photobucket.com/albums/k123/shsportsfan12/New%20Lift%20Buildup/FTSBuildup013.jpg
http://i87.photobucket.com/albums/k123/shsportsfan12/New%20Lift%20Buildup/FTSBuildup014.jpg
Shackle flip going on:
http://i87.photobucket.com/albums/k123/shsportsfan12/New%20Lift%20Buildup/FTSBuildup015.jpg
http://i87.photobucket.com/albums/k123/shsportsfan12/New%20Lift%20Buildup/FTSBuildup016.jpg
http://i87.photobucket.com/albums/k123/shsportsfan12/New%20Lift%20Buildup/FTSBuildup017.jpg
and on:
http://i87.photobucket.com/albums/k123/shsportsfan12/New%20Lift%20Buildup/FTSBuildup021.jpg
Zero Rate:
http://i87.photobucket.com/albums/k123/shsportsfan12/New%20Lift%20Buildup/FTSBuildup022.jpg
http://i87.photobucket.com/albums/k123/shsportsfan12/New%20Lift%20Buildup/FTSBuildup027.jpg
unsettled:
http://i87.photobucket.com/albums/k123/shsportsfan12/New%20Lift%20Buildup/FTSBuildup028.jpg
Front stripped:
http://i87.photobucket.com/albums/k123/shsportsfan12/New%20Lift%20Buildup/FTSBuildup034.jpg
http://i87.photobucket.com/albums/k123/shsportsfan12/New%20Lift%20Buildup/FTSBuildup035.jpg
http://i87.photobucket.com/albums/k123/shsportsfan12/New%20Lift%20Buildup/FTSBuildup037.jpg
http://i87.photobucket.com/albums/k123/shsportsfan12/New%20Lift%20Buildup/FTSBuildup042.jpg
Front inside my Honda
http://i87.photobucket.com/albums/k123/shsportsfan12/New%20Lift%20Buildup/FTSBuildup043.jpg
shsportsfan12
05-14-2009, 07:08 PM
and with the tires on:
http://i87.photobucket.com/albums/k123/shsportsfan12/New%20Lift%20Buildup/FTSBuildup044.jpg
http://i87.photobucket.com/albums/k123/shsportsfan12/New%20Lift%20Buildup/FTSBuildup045.jpg
http://i87.photobucket.com/albums/k123/shsportsfan12/New%20Lift%20Buildup/FTSBuildup046.jpg
http://i87.photobucket.com/albums/k123/shsportsfan12/New%20Lift%20Buildup/FTSBuildup047.jpg
http://i87.photobucket.com/albums/k123/shsportsfan12/New%20Lift%20Buildup/FTSBuildup048.jpg
http://i87.photobucket.com/albums/k123/shsportsfan12/New%20Lift%20Buildup/FTSBuildup051.jpg
http://i87.photobucket.com/albums/k123/shsportsfan12/New%20Lift%20Buildup/FTSBuildup052.jpg
torsion bars cranked 3/4 of the way...
http://i87.photobucket.com/albums/k123/shsportsfan12/New%20Lift%20Buildup/FTSBuildup055.jpg
http://i87.photobucket.com/albums/k123/shsportsfan12/New%20Lift%20Buildup/FTSBuildup057.jpg
DarkTahoe00
05-14-2009, 11:28 PM
Damn Man thats TIGHT! Man you put alot of work in that WOW! Great Job!
road1will
05-14-2009, 11:30 PM
wow thats a mean lookin truck. good work.
Are both the BMW's yours?
shsportsfan12
05-15-2009, 12:38 AM
Damn Man thats TIGHT! Man you put alot of work in that WOW! Great Job!
Thanks man. Always nice to hear people like it
wow thats a mean lookin truck. good work.
Are both the BMW's yours?
Thank you. It's no where near done (picked up more parts tonight, soon to have new wheels to push the tires out more, build rear bumper, etc etc).
I wish they were both mine....They are my buddies. He built the 1974 2002 ground up in about 2-3 months total. He recently built a turbo into it. It's much faster then his M3 right now. Fucking beast
Rollin Thunder
05-15-2009, 12:43 AM
Need some bigger meats now. they look tiny.
shsportsfan12
05-15-2009, 12:47 AM
Need some bigger meats now. they look tiny.
Naw... I finally have clearance. I'll try and find pictures of how fucked up my fenders are after catching air in the dunes. I need new front fenders and flares as they are not fixable. Smashed the shit outa them. With the new wheels it will push the tires out another inch and should help with the overall stance. If someone would buy my wheels, I could do the new wheels sooner.
jomulk56
05-15-2009, 12:49 AM
Looks good, get some bigger meats on there.
shsportsfan12
05-15-2009, 12:54 AM
Looks good, get some bigger meats on there.
Haha, Thanks man. See above. I value my paint and fenders. These 37's come up fast...specially with no front shocks right now :Boo: Tomorrow the material gets picked up for the new steering and shock hoops so that will likely go on on Saturday along with the new torsion bars I picked up tonight for it. I still need to get my driveshaft lengthened as well :nono:
Shaggy
05-15-2009, 02:32 AM
Yep, what everyone has said, bigger tires. Looks good!
shsportsfan12
05-15-2009, 04:59 AM
Yep, what everyone has said, bigger tires. Looks good!
Thanks man....I'm actually going for function on this build rather then form. The 37's tuck nicely. If I were to go to a 38"+ tire size I would need a different wheel, would also need to stock hubs and ball joints because they will start to go. The next tire size (out of all the tires I would run) only come in 15.5" width. That's a little too much. I also don't want to regear again nor worry about the shafts in the 10 bolt or the CV's up front. The axle seals are already fucked in the rear. I've blown 3 CV's in 8 months...the list goes on
bowtiefreak
05-15-2009, 11:19 AM
bad ass! You need a picture of it parked on a prius now
Cartwright
05-15-2009, 04:53 PM
Looks good bro. Now move to Texas!!
shsportsfan12
05-16-2009, 03:23 AM
Spent a couple hours working on it tonight. Full heim steering is now fabbed up, small alignment adjustment, new torsion bars are in along with Ford keys, drilled out new holes for compression struts only to figure out they wont work so at that point we gave up for the night. Pics will come tomorrow during the day light.
road1will
05-16-2009, 06:08 AM
Thanks man. Always nice to hear people like it
Thank you. It's no where near done (picked up more parts tonight, soon to have new wheels to push the tires out more, build rear bumper, etc etc).
I wish they were both mine....They are my buddies. He built the 1974 2002 ground up in about 2-3 months total. He recently built a turbo into it. It's much faster then his M3 right now. Fucking beast
very cool, ive always wanted a 2002!
nc6600
05-16-2009, 09:43 PM
Damn nice truck
JennaBear
05-16-2009, 09:56 PM
Where is the turbo?!?! Lookin good!
shsportsfan12
05-16-2009, 10:02 PM
Where is the turbo?!?! Lookin good!
Woah!! I didn't know you were sponsoring me :pepper: :pepper:
:crazy: I'm probably not going to change the aspiration of this truck. It's under warranty (Yes with all the modifications) and by the time the motor warranty is off it will have 100k miles on it. Not worth it at that point. I'll have a new one built by then and maybe, just maybe it will be done then.
Damn nice truck
Thank you sir.
I managed to fit my Honda under it today :crazy: Pictures later when I get home
JennaBear
05-16-2009, 10:05 PM
Woah!! I didn't know you were sponsoring me :pepper: :pepper:
:crazy: I'm probably not going to change the aspiration of this truck. It's under warranty (Yes with all the modifications) and by the time the motor warranty is off it will have 100k miles on it. Not worth it at that point. I'll have a new one built by then and maybe, just maybe it will be done then.
Your nose is growing.... :imo: I am the all knowing guru, you can't fool me!! :pepper:
Timmy
05-16-2009, 10:06 PM
dizzle, is that you?
shsportsfan12
05-16-2009, 10:16 PM
Your nose is growing.... :imo: I am the all knowing guru, you can't fool me!! :pepper:
Naw... I'm working on helping Dirt Mafia with a turbo setup (likely a T70) and Matt as well...but I don't like turbos. I'm not down for the dinky looking spinny exhaust mod... I like being blown :crazy: My last truck was blown, and I miss it
dizzle, is that you?
:lol::rofl2:
:nutkick:
Dude, they're still 37's. Fucking big tire. In a month or 2 I'll have a new setup on for sure though :secret:
JennaBear
05-16-2009, 10:18 PM
I am with you on that! I would take a blower over a turbo any day of the week, I dont like the spooling time.
shsportsfan12
05-16-2009, 10:20 PM
Jenna like being blown too :pepper:
:crazy:
One of my buddies just built a turbo setup on the 2002 and another has an E30 that he's blowing. I'm definitely liking the blower more. The turbo is cool shit and what not but I like the instant feel of the blower. I don't like being teased...when I put my foot down that is
JennaBear
05-16-2009, 10:25 PM
Jenna like being blown too :pepper:
:crazy:
One of my buddies just built a turbo setup on the 2002 and another has an E30 that he's blowing. I'm definitely liking the blower more. The turbo is cool shit and what not but I like the instant feel of the blower. I don't like being teased...when I put my foot down that is
Did Justin tell you what we are going to start carrying??? :secret:
shsportsfan12
05-16-2009, 10:27 PM
It's been a while since I talked to Justin. He did show me a list of stuff last time he was out here. My haunch is telling me this is something new...something very very nice. I'm down to whore you out as a possible exchange :crazy:
JennaBear
05-16-2009, 10:35 PM
I think this is much much better than Corsa exhaust systems :Handshake: so I think it would take A LOT of whoring to get him to drop ship ya one of these!! :popcorn:
You gonna head down to Ventura County for the meet next week? He is heading out there to do some tuning and then meeting me up in Long Beach. Putting money down on a 1900 for the TBSS then too :shocked: SO EXCITED!!!
shsportsfan12
05-16-2009, 10:36 PM
I'll be in New York then. I'm way up North...actually you know where I'm at... San Jose. Tis quite a drive.
JennaBear
05-16-2009, 10:48 PM
Eh, I used to drive back and forth from Davis to Sandy Eggo, not too bad of a drive!
shsportsfan12
05-16-2009, 10:50 PM
That's a bitch. My truck isn't even drivable right now so I'm S.O.L
Timmy
05-17-2009, 05:25 PM
Naw... I'm working on helping Dirt Mafia with a turbo setup (likely a T70) and Matt as well...but I don't like turbos. I'm not down for the dinky looking spinny exhaust mod... I like being blown :crazy: My last truck was blown, and I miss it
:lol::rofl2:
:nutkick:
Dude, they're still 37's. Fucking big tire. In a month or 2 I'll have a new setup on for sure though :secret:
true. i'll give you that
shsportsfan12
05-18-2009, 11:13 PM
Couldn't decide if I wanted my wheels like this
http://i87.photobucket.com/albums/k123/shsportsfan12/New%20Lift%20Buildup/FTSBuildup058.jpg
http://i87.photobucket.com/albums/k123/shsportsfan12/New%20Lift%20Buildup/FTSBuildup059.jpg
or
http://i87.photobucket.com/albums/k123/shsportsfan12/New%20Lift%20Buildup/FTSBuildup060.jpg
Both would provide great traction :crazy:
New steering is made
http://i87.photobucket.com/albums/k123/shsportsfan12/New%20Lift%20Buildup/FTSBuildup062.jpg
Angles are still flat as fuck
http://i87.photobucket.com/albums/k123/shsportsfan12/New%20Lift%20Buildup/FTSBuildup063.jpg
Cranked a lot more then what's pictured here
http://i87.photobucket.com/albums/k123/shsportsfan12/New%20Lift%20Buildup/FTSBuildup065.jpg
Honda fits right under
http://i87.photobucket.com/albums/k123/shsportsfan12/New%20Lift%20Buildup/FTSBuildup066.jpg
http://i87.photobucket.com/albums/k123/shsportsfan12/New%20Lift%20Buildup/FTSBuildup067.jpg
http://i87.photobucket.com/albums/k123/shsportsfan12/New%20Lift%20Buildup/FTSBuildup072.jpg
http://i87.photobucket.com/albums/k123/shsportsfan12/New%20Lift%20Buildup/FTSBuildup068.jpg
Now it looks like I need bigger tires
http://i87.photobucket.com/albums/k123/shsportsfan12/New%20Lift%20Buildup/FTSBuildup069.jpg
http://i87.photobucket.com/albums/k123/shsportsfan12/New%20Lift%20Buildup/FTSBuildup070.jpg
http://i87.photobucket.com/albums/k123/shsportsfan12/New%20Lift%20Buildup/FTSBuildup071.jpg
Tis all for now
shsportsfan12
06-08-2009, 11:31 PM
Finally got the Compression struts in. Had to remake them....Started the shock hoops on Saturday. Everything minus anything 4wd should be done by late Thursday. Leaving for Pismo on Friday....2wd of course.
http://i87.photobucket.com/albums/k123/shsportsfan12/New%20Lift%20Buildup/FTSBuildup.jpg
Modded
06-08-2009, 11:49 PM
Looks good and interesting man!!!
You def. need bigger tires to make that Silvy pop off?
Was the negative camber in the pic caused by worn suspension, and what about the Cali?
shsportsfan12
06-09-2009, 03:20 AM
Looks good and interesting man!!!
You def. need bigger tires to make that Silvy pop off?
Was the negative camber in the pic caused by worn suspension, and what about the Cali?
No bigger tires....at least not now. I'll find out how it does in the dunes this weekend. It will be getting new wheels with a better backspacing to push the tires out more.
The alignment was due to not doing anything about it when we put the lift on basically.
As for the Cali....I can't afford new springs out back, so I did a shackle flip, 2" shackle, 1" Zero Rate, stock springs w/ AAL. I'll throw some 4" leafs back there eventually and maybe 2 " Zero rate. I need to rotate the axle so we'll see what I do when I get around to that....I have no clue. I just want to get it driving at the moment. Haven't driven it in over 3 months now.
vBulletin® v3.8.7, Copyright ©2000-2012, vBulletin Solutions, Inc.