PDA

View Full Version : Question about bleeding brakes

ESV_Platinum
08-06-2011, 12:42 AM
Hi guys

I have an 05 escalade, i just replaced the rear dust shields all 4 corners rotors and pads etc at 85k miles.

The brake fluid is looking dark in color and I would like to replace and bleed the brakes.

Do I need a scanner to do this or can I bleed the brakes in the traditional way with a pressure bleeder?

Thanks guys!
chip
08-06-2011, 01:18 AM
I do mine old school: With a wrench and a friend.
Rivieraracing
08-06-2011, 08:30 AM
I do mine old school: With a wrench and a friend.

Same here!! Just did our denali a couple weeks ago, worked like a charm!
chauncey0337
08-06-2011, 01:35 PM
I do mine old school: With a wrench and a friend.

X2
chip
08-06-2011, 06:09 PM
This thread has great timing. I just did my rear setup.

Check it out:


http://i620.photobucket.com/albums/tt290/chipottley/NewBrakeSetup.jpg
beav626
08-07-2011, 05:03 PM
Me and a friend just did my 03 Escalade. It was easy and no scanner needed. we did it old school