Mods - Fun with Photoshop

[BOSS]

Thought I'd start a thread and see some cool stuff some of you guys can do with Photoshop.

Here's one I did earlier, a rear door delete and roll pan install :hands:

[BlizzardX23]

http://i130.photobucket.com/albums/p277/blizzardx23/Tahoe%20Forums/SANY0725.jpg

http://i130.photobucket.com/albums/p277/blizzardx23/Tahoe%20Forums/tag.jpg

[brndns_hoe]

here ya go, i suck, lol...got it lowered ok, but that front wheel turned out shitty,,,oh and added extra fog lights...and tried to make the grille look painted, before i actually did paint it

[BOSS]

Rear door delete
Rollpan
Bagged


B

[BOSS]

I think I forgot a piece of my roof rails.

[JKmotorsports]

BOSS, have you tried making the rear door window and side quarter windows into one, like an obs 2-dr? Try that and then bring the front edge of the rear door window back just a tad so the complete length of glass isn't as long and will blend in with the overall truck better.

[BOSS]

BOSS, have you tried making the rear door window and side quarter windows into one, like an obs 2-dr? Try that and then bring the front edge of the rear door window back just a tad so the complete length of glass isn't as long and will blend in with the overall truck better.

Honestly I'm just learning this PS stuff LOL~

I'll give it a whirl

[BOSS]

I suck LOL!

[YNOT]

Thought I'd start a thread and see some cool stuff some of you guys can do with Photoshop.

Here's one I did earlier, a rear door delete and roll pan install :hands:

are those tahoe running boards or escalade or something? i like the looks of colormatched with a little black plastic.

[BOSS]

are those tahoe running boards or escalade or something? i like the looks of colormatched with a little black plastic.

From a custom set , there's a link to some like them in my pictures thread in this forum brotha

B

[J-Will]

http://i130.photobucket.com/albums/p277/blizzardx23/Tahoe%20Forums/SANY0725.jpg

http://i130.photobucket.com/albums/p277/blizzardx23/Tahoe%20Forums/tag.jpg

hmm. ive seen those headlights somewhere...

DO IT!!

[BlizzardX23]

yea...I made this pic a long time ago...it used to be my signature for the longest time back at TF.com

[BOSS]

crap one sec..posting a new pic

[BOSS]

Ok here's my best shot at photoshop, spent 2 hours doing this shit LOL!

I think I have a pretty good look here. It would take some serious body/sheet metal work but you'd be amazed what you see these body guys do if you look for a while in a junkyard at the cutouts they do on SUVs to repair entire sides of vehicles. Would probably be glassing up part of the front bumper to complete but here it is:

-rear door delete
-middle window delete
-suburban rear window
-rollpan with rear quarter panel extended to match step contour
-front bumper extended to match step contour

What u guys think?

B

[Rollin Thunder]

http://i112.photobucket.com/albums/n167/fishbonejr/IMG_00272-1.jpg

[BOSS]

Image is dark - can't see sh!t

[BlizzardX23]

Image is dark - can't see sh!t


uhh..yea... x2

[Rollin Thunder]

Image is dark - can't see sh!t

I did that on purpose cause it looks badass.

[AtomicHoe094]

who knows how to make sig pics??

[brndns_hoe]

Ok here's my best shot at photoshop, spent 2 hours doing this shit LOL!

I think I have a pretty good look here. It would take some serious body/sheet metal work but you'd be amazed what you see these body guys do if you look for a while in a junkyard at the cutouts they do on SUVs to repair entire sides of vehicles. Would probably be glassing up part of the front bumper to complete but here it is:

-rear door delete
-middle window delete
-suburban rear window
-rollpan with rear quarter panel extended to match step contour
-front bumper extended to match step contour

What u guys think?

B



looks good! now git r dun!

[chistoso]

Ok here's my best shot at photoshop, spent 2 hours doing this shit LOL!

I think I have a pretty good look here. It would take some serious body/sheet metal work but you'd be amazed what you see these body guys do if you look for a while in a junkyard at the cutouts they do on SUVs to repair entire sides of vehicles. Would probably be glassing up part of the front bumper to complete but here it is:

-rear door delete
-middle window delete
-suburban rear window
-rollpan with rear quarter panel extended to match step contour
-front bumper extended to match step contour

What u guys think?

B

Try shortening the truck so that the door rests just shy of the rear fenderwell. there's too much gap between the door and the fendewell.

[BOSS]

Try shortening the truck so that the door rests just shy of the rear fenderwell. there's too much gap between the door and the fendewell.

Well I was trying to avoid having it look like the 2dr, more like an extended 2dr ya know? Unique is the trick here but it needs to be aestheticly pleasing :)

Does it just not look right with that in mind?

B

[chistoso]

Just cut off half of what is showing between the well and the door. Also, make the rear glass perpendicular with the door, it looks like an S10 with that angle. There's a guy across from where I work, he's doing up a 91 suburban, he's cutting off 10" from behind the rear wells, 12" in front of the wells and trimming the rear doors around the wells. It's gonna look like the 2nd gen Tahoe GM never built. It's beginning to take shape. As soon as he lets me I'll snap a couple pics. it looks shitty right now.

[Rollin Thunder]

Just cut off half of what is showing between the well and the door.

that and paint it black! That would loooook sooooooo awesome!

[BOSS]

that and paint it black! That would loooook sooooooo awesome!

You guys are killing me, you're giving me too much credit - I'm not that good with photoshop LOL!!

I was trying to keep it realistic too but lemme see what it looks like.

B

[wmgood64]

I likey!!

[chistoso]

Well I was trying to avoid having it look like the 2dr, more like an extended 2dr ya know? Unique is the trick here but it needs to be aestheticly pleasing :)

Does it just not look right with that in mind?

B

Alright. I'm not very good but this is what I mean..

http://i38.photobucket.com/albums/e137/chistosok5/2drhoe.jpg

I know why GM didn't make them in 2dr models. Because they would look like this:

http://i38.photobucket.com/albums/e137/chistosok5/2drhoe2.jpg

I don't like it..

[jd1]

here you go............

http://img27.picoodle.com/img/img27/2/7/12/jd1/f_GMCYukon200m_06081f8.jpg (http://www.picoodle.com/)

[brndns_hoe]

shaved the doors now, and tinted the windshield, and got rid of some power lines and crap that were in the background, and painted the bumper too, didn't get to the cap and valance, this photoshopping is a pain!

[jd1]

heres my quick 2 dr......took me about 5 min so its rough version

http://img27.picoodle.com/img/img27/2/7/12/jd1/f_DSC2509modim_76d3901.jpg (http://www.picoodle.com/)

[BOSS]

heres my quick 2 dr......took me about 5 min so its rough version

http://img27.picoodle.com/img/img27/2/7/12/jd1/f_DSC2509modim_76d3901.jpg (http://www.picoodle.com/)

Damn dude you suck.












Nah just kidding - you make it look so easy LOL! I was really trying to keep the long portion of the vehicle. That way I could realistically do this someday when I get bored.

B

---------- Post added at 10:24 PM ---------- Previous post was at 10:23 PM ----------

shaved the doors now, and tinted the windshield, and got rid of some power lines and crap that were in the background, and painted the bumper too, didn't get to the cap and valance, this photoshopping is a pain!

Looks good man, this is fun



B

---------- Post added at 10:28 PM ---------- Previous post was at 10:24 PM ----------

http://i38.photobucket.com/albums/e137/chistosok5/2drhoe2.jpg

I don't like it..[/QUOTE]


Ya me neither - how can I make it look good and keep the length


B

---------- Post added at 10:29 PM ---------- Previous post was at 10:28 PM ----------

here you go............

http://img27.picoodle.com/img/img27/2/7/12/jd1/f_GMCYukon200m_06081f8.jpg (http://www.picoodle.com/)

That's pretty sick right there.


B

[AtomicHoe094]

how did you guys download photoshop? i wanna try!

[BlizzardX23]

its a very expensive program...
you can download it from some warez sites (not recommended..) or off of kazaa, limewire, bearshare...etc...((That is illegal))

hmmm...do I have to bring out my super photoshop skills?? What do you guys want to see most?...give me a list of what I should do..example, shaved door handles, rear door delete...etc...I'll see what I can do

[brndns_hoe]

hell, i just used Paint...can't download photoshop on my work comp, it's on my girl's comp, but she's always on it

[jd1]

hell, i just used Paint...can't download photoshop on my work comp, it's on my girl's comp, but she's always on it

I though it was good either way,

[YNOT]

mine so far, i'll work on it more later.

chop........
bagged bodydropped
amber delete on head and tail lights
running board delete
shaved handles and gas cap
roll pan (i actually have one in the paint shop right now with smooth vents)
road cone and fire hydrant delete...:insane:

http://i35.photobucket.com/albums/d199/Low03Chev/sofar.jpg

[chistoso]

Heres another shitty attempt. It's stock lenght and deleted the rear door line, lengthened the door and the rear glass.

http://i38.photobucket.com/albums/e137/chistosok5/hoe22.jpg

This could work in real life and I think it would look sweet, if done right of course..

[tast101]

only thing I did was my Smukon:

http://farm4.static.flickr.com/3258/2820424040_1d794b14df.jpg
http://farm4.static.flickr.com/3112/2820424762_a2f648bcb5.jpg
http://farm4.static.flickr.com/3217/2820424402_91e2fc9669_o.jpg

[AtomicHoe094]

chode mobile.. lol

[brndns_hoe]

haha, micromachines are back!

[BlueTahoe2001]

Hey Guys can someone help me out here-

I just wanted to see if someone could take my truck and put these rims on the truck in 2 forms? One lowered with the rims and the other Standard with these rims-

http://i842.photobucket.com/albums/zz342/2001BlueTahoe/DSC01076.jpg
http://i842.photobucket.com/albums/zz342/2001BlueTahoe/mbmprdcang.jpg

Thanks,
Tyler

[brndns_hoe]

Hey Guys can someone help me out here-

I just wanted to see if someone could take my truck and put these rims on the truck in 2 forms? One lowered with the rims and the other Standard with these rims-


Thanks,
Tyler

i can work on that for ya if someone else hasnt started

[BlueTahoe2001]

i can work on that for ya if someone else hasnt started

Yeah, That would be great! Thanks!

[tast101]

I know it's not a hoe or a Kon, but here's some stuff I did a long time ago:

http://farm1.static.flickr.com/25/36361874_a4bbed04e3.jpg

http://farm1.static.flickr.com/29/36361878_a02c901f77.jpg

http://farm1.static.flickr.com/23/33782380_e2c8e4711f_o.jpg

http://farm4.static.flickr.com/3329/3508417647_f51f7f8ac8.jpg

http://farm4.static.flickr.com/3329/3508417901_65a4fdba81_o.jpg

http://farm1.static.flickr.com/28/36375240_7c01ff5714_o.jpg

http://farm1.static.flickr.com/28/36375241_19bff728ab_o.jpg

http://i263.photobucket.com/albums/ii155/tast101/yukonsig.jpg

[matt14]

its a very expensive program...
you can download it from some warez sites (not recommended..) or off of kazaa, limewire, bearshare...etc...((That is illegal))

hmmm...do I have to bring out my super photoshop skills?? What do you guys want to see most?...give me a list of what I should do..example, shaved door handles, rear door delete...etc...I'll see what I can do

If you can, you want to try and put a sierra bumper on my yukon. here are some pics of my truck.

http://i277.photobucket.com/albums/kk66/2006yukon/aquar115.jpg
http://i277.photobucket.com/albums/kk66/2006yukon/aquar112.jpg here are some pics of the bumper. so you have a idea
http://image.dieselpowermag.com/f/Team%20Overkill/7367311+w320+h240+cr0+re1+ar1/2006-gmc-sierra-teammates-truck.jpg
http://www.usspeedonline.com/Merchant2/graphics/00000001/Sierra%20F.jpg

[brndns_hoe]

Yeah, That would be great! Thanks!

hey what's the name of those rims?

[brndns_hoe]

hey what's the name of those rims?

nevermind, i was gonna search for a photo of a vehicle with th rims, but i went ahead and did it with that pic, i have to attach the fotos, photobucket wasn't letting me attach one for some reason., but here ya go.

[OMG its Jason]

That photo doesn't do it justice. If you get those tims bigger, they are actually VERY nice and go well with blue. I had Imolas on my Vette which looked a lot like those, Heres what they look like against BLUE..

Completely different vehicle, but the rims and color are close enough to give a contrast. Once again, I'd recommend going with a rim size of 20+

[brndns_hoe]

it kinda sucked using a picture of rim like that, i was hoping he'd answer about the name of the rims, so i could find a pic of them on a vehicle to use...i could probably do it with one of those vette pics u posted...those do look nice!

[BlueTahoe2001]

it kinda sucked using a picture of rim like that, i was hoping he'd answer about the name of the rims, so i could find a pic of them on a vehicle to use...i could probably do it with one of those vette pics u posted...those do look nice!

Hey Sorry, They are MB "Predator" Wheels...

[BOSS]

Someone who can actually do it give my shit a targa top....I tried and can't get it right

[BlizzardX23]

If you can, you want to try and put a sierra bumper on my yukon.



Very VERY difficult...your camera angles wont allow for it as I have to find an image of another Sierra with those exact angles...yours so far are too low and too much of an angle


but...it will not look good...I was looking at the Sierra bumper and it wont fit correctly because its not tall enough...it will look odd...your bumper is much taller which gives it a better look....heres your bumper painted black though...were you looking for the fog lights specifically?


http://i130.photobucket.com/albums/p277/blizzardx23/Tahoe%20Forums/HBB.jpg

[AtomicHoe094]

that looks pretty sick

[matt14]

Well, i liked the big fog lights. I also just wanted something different then everyone else.
Wasnt sure how it would look. Thought it would fit, never really looked into it though. Thanks for the pic though, it looks good. Will keep this in mind.

[tast101]

very very difficult...your camera angles wont allow for it as i have to find an image of another sierra with those exact angles...yours so far are too low and too much of an angle


but...it will not look good...i was looking at the sierra bumper and it wont fit correctly because its not tall enough...it will look odd...your bumper is much taller which gives it a better look....heres your bumper painted black though...were you looking for the fog lights specifically?


http://i130.photobucket.com/albums/p277/blizzardx23/tahoe%20forums/hbb.jpg

black chrome ftw.

[matt14]

Every time i look at this pic, i like more and more. Is it a pain in the ass to paint chrome? What about the rear bumper. Any suggestions. If i were to paint teh front, how bout a nali rear bumper? Does anyone know about how much this would cost.

[BlizzardX23]

I agree...that front, with a 'Nali rear would be bad ass!

[YNOT]

Every time i look at this pic, i like more and more. Is it a pain in the ass to paint chrome? What about the rear bumper. Any suggestions. If i were to paint teh front, how bout a nali rear bumper? Does anyone know about how much this would cost.
i would just paint the rear bumper you have.

[ROBERTOcritser]

only thing I did was my Smukon:

http://farm4.static.flickr.com/3258/2820424040_1d794b14df.jpg
http://farm4.static.flickr.com/3112/2820424762_a2f648bcb5.jpg
http://farm4.static.flickr.com/3217/2820424402_91e2fc9669_o.jpg

I have those wheels on my tahoe (U2-55) 24"

[05nali]

here's mine

before
http://i851.photobucket.com/albums/ab77/manningfan10/0827090852b-1.jpg

after
http://i851.photobucket.com/albums/ab77/manningfan10/lowerednali.jpg

[MOBmentality]

Yukon Magnum