Old Manifolds

[arowsom]

Anybody have any advice on unbolting the exhaust pipes from the manifolds carefully. I have to replace my converter and my manifolds are so rusted I'm thinking they'll break before the bolts come out & I'd rather not have to replace the manifolds as well. Any advice would be MUCH appreciated.

[bai78]

Repeated treatments over multiple days of PB Blaster on the bolts/area you need to work on.

[AtomicHoe094]

the exhaust manifold bolts usually never break. its just the opnes that go to the Ypipe that are brittlee

[retorq]

Run the truck till they are hot and try it, that is really the only way I've ever done it.

[arowsom]

Thanks Guys. I'll try all of the above and report back.

[foreverfalcon40]

REPORT BACK IN GENERAL DISCUSSION!

THIS IS THE TECH FORUM!

GL & THANKS

ff40

[ljo]

Try to find some Kano Kroil, I can't say enough good things about this stuff. This stuff is World's ahead of PB Blaster. While it is pricey, and harder to find, it is "the oil that creeps!"

---------- Post added at 05:35 AM ---------- Previous post was at 05:34 AM ----------

REPORT BACK IN GENERAL DISCUSSION!

THIS IS THE TECH FORUM!

GL & THANKS

ff40

What a jerk!

[retorq]

What a jerk!

Laugh all you want dude, but its true, I wish I was making this shit up, but I'm not. I've gotten into many street fights before, about a dozen alone during highschool. Most of the time the fight would go like this:

-We face each other and put our fists up
-We start moving around in circles, facing each other ready to fight
-Guy throws a punch, I anticipate his move and dodge his punch
-I then punch him a few times in the chest and stomach area
-He backs away, holding his cheat area groaning in pain
-I then proceed to punch him in his jaw several times and knock him down to the ground
-I look him over, chuckle and leave the area

Most of the time my opponent doesnt even get a punch in, and in the few times where my opponent did get a punch in, it wasnt a good one and was fairly weak. See, I'll admit I'm not very strong, but I am pretty fast and good at dodging punches and anticipating the opponents moves. A few swift hits and they are done son, done!

[SunlitComet]

the studs are in the manifolds so try a nut splitter if all else fails and then clean the threads with a die.

[AtomicHoe094]

Laugh all you want dude, but its true, I wish I was making this shit up, but I'm not. I've gotten into many street fights before, about a dozen alone during highschool. Most of the time the fight would go like this:

-We face each other and put our fists up
-We start moving around in circles, facing each other ready to fight
-Guy throws a punch, I anticipate his move and dodge his punch
-I then punch him a few times in the chest and stomach area
-He backs away, holding his cheat area groaning in pain
-I then proceed to punch him in his jaw several times and knock him down to the ground
-I look him over, chuckle and leave the area

Most of the time my opponent doesnt even get a punch in, and in the few times where my opponent did get a punch in, it wasnt a good one and was fairly weak. See, I'll admit I'm not very strong, but I am pretty fast and good at dodging punches and anticipating the opponents moves. A few swift hits and they are done son, done!

Where did this come from? lol

[retorq]

Where did this come from? lol

LOL classic ethug ...