Broke a lug.....WTF!

[Grocery Getter]

Hey y'all. I was messing around with my truck today and I reckon I cross threaded one of the lugs because when I went to take the wheel off again it was stuck and after some fussing it just snapped in half.......

What should I do? I've never had a lug break. I've taken these wheels off 20 or 30 times and no problems..... Half the lug is broken off in the nut so I will probably have to get new lugs since they are lock nuts but what about the stud?

Let me know.......

:emotions122:

[Modded]

Whats cross threaded a lug nut?
Also help clear me up, is it the "lug nut" that broke or the "lug stud", thanks!

[BOSS]

This stuff is in the air..check out my thread about studs and see if that helps...I posted a video too


BOSS

[Grocery Getter]

Whats cross threaded a lug nut?
Also help clear me up, is it the "lug nut" that broke or the "lug stud", thanks!

I guess it didn't go on straight and the threads got jacked up once I drove on it because when I got home and had to get the wheel off again it got stuck and broke. The lug stud broke in half....

[Sepiroth]

Yea do a quick search on Boss's thread. He just replaced a few studs.

[Grocery Getter]

I found it, looks like just take the brake rotor off pound it out and pull it through with the nut....

Any suggestions on how to get the other half of the stud out of the nut so I don't have to buy all new lug nuts. I have a locking set and I can't buy just one as far as I know since each set has a unique patten and socket..........

[Sepiroth]

Chances are the nut itself is also ruined, seeings how the lug nut did break.

[Grocery Getter]

Yeah, no doubt. I will just epoxy that fucker in place until I powder coat my wheels and then I will just buy black lugs and fix the stud...... no harm in driving on 5.5 lugs for a bit......right

[Sepiroth]

Yea no harm. You can get away with one lug gone.

[BOSS]

Here ya go:

http://www.tahoeyukonforum.com/forum/showthread.php?t=1176&page=3


BOSS