started my interior today

[clean454]

so i got some black pain yes in a rattle can
i cant stand my interior its all beat up
tan fadded
and ive always wanted black
so today i got some black paint and (thehoe92) convinced me it would be a good idea and well i started today and its commn out pretty good

http://i376.photobucket.com/albums/oo205/clean95/img1269224834865.jpg
http://i376.photobucket.com/albums/oo205/clean95/img1269224834613.jpg

tomorrow when its warmer out side ill do more this is just coat 1 im gunna do a few
now i just need to find some black seats maybe out of a nbs

[BOSS]

Damn man! LOL!

Looks good, are you doing all the prep work too?? That will inevitably determine how long the paint will stick of course.

[clean454]

yea pretty much
cleaned it all up
then light sand
then sprayed
it started out as just one door panel so see if i like black
then all of a sudden the dash was done and i was off to the other side! LOL

[BOSS]

I think I started a craze...as long as you prep correctly, it should come out fine. The issue beyond prep becomes, did you use the correct paint? Paint on plastic and vinyl should have the ability to bend and flex.

B

[clean454]

i shoulda thought this out more LOL
the paint i got said works with plastic so i guess ill find out
i found a wrecked nbs hoe and im thinking interior swap
and get the seats out of it
so as of now im pretty much experimenting LOL

thanks for the info tho boss

[BOSS]

i shoulda thought this out more LOL
the paint i got said works with plastic so i guess ill find out
i found a wrecked nbs hoe and im thinking interior swap
and get the seats out of it
so as of now im pretty much experimenting LOL

thanks for the info tho boss

Well hell it looks damn good man, keep it up! I'm going to unveil mine entirely next weekend...I'm sure this will light a fire under the interior craze


B

[clean454]

oh man i cant wait to see urs!
if i had more time and $ id build a mini spray booth and woulda done what u did lol
but forsure i will get more pics up tomorrow
im gunna try and get some good progress in

[imtbear69]

Hey Chris,what does it say in your door jam? something about scraping?

[thehoe92]

you did start a craze boss
the whole time we were painting we kept bringing up your name
"would boss approve?"
HAHA!

LMFAO! you can tell I was involved with this project
http://i376.photobucket.com/albums/oo205/clean95/img1269224834248.jpg

[clean454]

http://i376.photobucket.com/albums/oo205/clean95/no-1.jpg

---------- Post added at 09:14 PM ---------- Previous post was at 09:13 PM ----------

hey KC how did u get that picture! LOL

[imtbear69]

http://i376.photobucket.com/albums/oo205/clean95/no-1.jpg

---------- Post added at 09:14 PM ---------- Previous post was at 09:13 PM ----------

hey KC how did u get that picture! LOL

May I use that on mine as mine sits a little lower then your i really need it LOL

[clean454]

LOL dude go for it
totally worth it.

hey what do u fenders messure out from the ground
im curious and like the stance of ur truck
i wanna go lower but my wheels dont allow!
and my keys up front still have room to drop more! UGH!

[thehoe92]

hacker status haha!
your photobucket doesn't have a password

so I'm thinking if you are serious about this whole painting thing chris we can easily make a booth in my backyard I have SO much room, just let me know I'll start getting materials ready

[boble94]

nice man. i ilke the flow. how did you do it? was it hard to take off the dash?

[clean454]

hacker status haha!
your photobucket doesn't have a password

so I'm thinking if you are serious about this whole painting thing chris we can easily make a booth in my backyard I have SO much room, just let me know I'll start getting materials ready

NICE bro it has a password to upload but not to view
hmm whatever its all good

and i paintted that dash in the truck LOL fucket masking takes less time then to pull the dash out

and KC i wanna make a booth that would be SICK

[imtbear69]

LOL dude go for it
totally worth it.

hey what do u fenders messure out from the ground
im curious and like the stance of ur truck
i wanna go lower but my wheels dont allow!
and my keys up front still have room to drop more! UGH!

OK from dead center fender to ground is 26" front 27" back which gives me
4 1/2 " from bottom of frame to the ground

[clean454]

OK from dead center fender to ground is 26" front 27" back which gives me
4 1/2 " from bottom of frame to the ground

ugh im so close to u!!!
28 1/2 in the rear and about 29 in the front
and 7 1/2 frame to ground!! DAMNIT!!
this is motivation for me to be lower
ur 2x4 right?

im 4x4 and operational! LOL

[imtbear69]

ugh im so close to u!!!
28 1/2 in the rear and about 29 in the front
and 7 1/2 frame to ground!! DAMNIT!!
this is motivation for me to be lower
ur 2x4 right?

im 4x4 and operational! LOL

Yup 2x4 on 17" Coddington wheels with 45 series tires i could adjust a little with my set up and be about an inch lower but then i couldn't get in my drive way lol,the guys in my car club want me to bag it but damn i think its a low enough hoe as it is lol

[clean454]

i started to order what i need to bag
but im gunna hold off for a while
i guess its time to get some new wheels LOL

anyways bro ur truck looks sweet

[imtbear69]

Don't worry Chris you will get there and thanks for the props and keep your fingers crossed for us I entered the Hoe in next years bullrun show so I hope we get picked to do it maybe even get some sponsership from the site would be cool

[clean454]

thats awesome! the bullrun good luck hope to see u on there haha

[imtbear69]

Thanks i hope to see me on there too lmao

[boble94]

dam. haha. you're crazy.

[txhoescrapin]

Did you sand lightly? Primer the plastic? painted dash in truck?

[clean454]

i lightly sanded then just sprayed the paint didnt use primer and ya in the truck i sparyed
that rattle can skills! LOL
i just masked off the windshield and went to town

[txhoescrapin]

You painting the pillars also?

[clean454]

yes i will ill post pics as i go todays kinda clowdy outside so idk if im gunna get painting done but i will try

[thehoe92]

you are getting painting done today because I am coming over and we are going to home depot to get more semi gloss then painting more shit :D

[clean454]

aight bro im down be home at 4

some new pics loading now

---------- Post added at 12:11 PM ---------- Previous post was at 12:06 PM ----------

http://i376.photobucket.com/albums/oo205/clean95/img1269284962970.jpg
http://i376.photobucket.com/albums/oo205/clean95/img1269284962627.jpg
http://i376.photobucket.com/albums/oo205/clean95/img1269284963676.jpg
http://i376.photobucket.com/albums/oo205/clean95/img1269284963517.jpg
http://i376.photobucket.com/albums/oo205/clean95/img1269284963256.jpg

---------- Post added at 12:12 PM ---------- Previous post was at 12:11 PM ----------

need more coats but in all its commn together
i ran outa paint LOL

next is carpets and i need to find some good nbs black seats
im thinking cloth

[puckhead]

Lookin good! let us know how it holds up against wear and tear and fading and all that

[clean454]

will do!

[k gee]

Did you use SEM or just cheap paint? Looks good though.

[imtbear69]

Damn i wish I lived closer to Sac i would come over too,i want to repaint my dash as well

[95YUKON]

i gotta paint my dash too! it looks good man, did you get any drips?? how does the "suede" on the door panels feel?? is it stiff or ruff beacuause of the paint or is it still "soft" like factory?

[clean454]

all in all its holding up pretty well i need to re do the doors

i never re coated them