Post:All lowered tahoes 4dr and 2dr

[1999hoe]

i think we all wouldnt mind have a reference point so if you could post pics and also a quik summary of your parts and drop specs would be great ill be posting mine on next tuesday...

Perhaps we could get this stickied in this forum

[HuskerHoe]

1999 4wd Hoe, McG's 2/4 drop(keys, shackle's and hangers). Titan 18's on 265/60/18. Summit special drop shocks, soon to be replaced with Belltech Nitro's.

http://i305.photobucket.com/albums/nn222/jakehermance/DSC00367.jpg

http://i305.photobucket.com/albums/nn222/jakehermance/DSC00368.jpg

[blackcoffee]

Sweet Gold Hoe!

[imtbear69]

4/6 drop,Belltech springs, drop spindals and shackels, Belltech nitro shocks, tires are Falcon 225/45/17 on Boyd Coddington Stingrays

[clean454]

ahh yes my hoe again! LOL

ummm drop keys up front like 2-4 ish
flip kit on the rear and shackles about 7 inches :)

and its gettn bagged reall soon
http://i376.photobucket.com/albums/oo205/clean95/img1267678560972.jpg
rear
http://i376.photobucket.com/albums/oo205/clean95/img1267678560763.jpg
http://i376.photobucket.com/albums/oo205/clean95/img1267837199000.jpg

[1999hoe]

theres gotta be more of us ....

[HuskerHoe]

kinda what i was thinking...

[branndon_b]

hopefully i'll join the club one day soon...

[imtbear69]

hopefully i'll join the club one day soon...

You will get there sometimes it just takes time

[branndon_b]

i'm thinking some 22's or 24's, probably 22's, and drop to make it look good. but at the same time i don't wanna go too low to where i can't tow my boat. then again, i've been debating a roll pan with a hide a hitch, which i'm thinking is a higher receiver hitch since it's not below the bumper anymore, and behind instead. so maybe i'll pick up a couple, 3 inches on my hitch height, which would let me drop accordingly in the back and remain at the same height. but then i gotta contemplate losing the spare to do it... decisions decisions. i'm probably just overanalyzing like i do about everything, to the point that i often lose interest before i follow through. so often it's not a matter of lack of means, just more a lack of decision making on my part. oh well. we'll see what happens.

[HuskerHoe]

I'm dropped with factory hitch. I use a 2" drop hitch but flip it upside down, 2" up. I've pulled an 8000lb trailer a couple times no problem. Never used my spare tire in the 3 years I've had it so I got rid of it. I also have one of those 250psi compressors that you plug into your cigarette lighter.

I wouldnt heitate to pull a 4000lb boat with a hidden hitch and some helper bags. Buy a little compressor, ditch the spare and dont look back

[branndon_b]

i guess my boat hitch is just kinda high, cause i use like a 5 in drop hitch i think, flipped. and it settles out kinda level when it's on my truck. as far as i know i'm factory height, doesn't look lowered. maybe my rear springs are tired? but that's the only thing i really pull with it, the only heavy thing, anyway. (22' bay boat). it might just be tongue heavy, no telling. haven't pulled much stuff in general, so i dunno. anyhow, thanks for the info. didn't mean to threadjack it. branndon

[Low97tahoE]

ahh yes my hoe again! LOL

ummm drop keys up front like 2-4 ish
flip kit on the rear and shackles about 7 inches :)

and its gettn bagged reall soon

i saw somewhere on here that you were riding without a notch or somethin...i was wondering, did u ever notch ur frame, and also, how did it ride without the notch...i am doing a flip kit for my 4/6 drop and i wont have time to notch the frame until the next sunday...so i imagine ill be hittin the bumpstops alot for a week or so, lemme know how it was for you without the notch. thanks

[AtomicHoe094]

i have a 2/2 on mine right now, youve seen my hoe enough. But next week itll be around a 4/6. ill be sure to throw some pics up here with the powdered rims and shit.

Low97tahoE- put some pics of your truck up, i love your truck, always look at it on Cardomain.

[Low97tahoE]

Here are the requested pics. Ill be putting on the Flip kit Friday, ridin dirty for a little while and then doin coils soon after i get my exhaust ran again. (had to cut the tailpipes off to go 4/6.

[HuskerHoe]

low97, follow the rules!!!! Stats man!

Lol just joking. What are the details on the hoe though. 2wd I'm assuming? Tire and rim size?

[clean454]

i saw somewhere on here that you were riding without a notch or somethin...i was wondering, did u ever notch ur frame, and also, how did it ride without the notch...i am doing a flip kit for my 4/6 drop and i wont have time to notch the frame until the next sunday...so i imagine ill be hittin the bumpstops alot for a week or so, lemme know how it was for you without the notch. thanks

i havnt notched yet
it rides ok a little bouncy take the bump stop bracket out when u do the flip kit
the bracket has a bolt on one side and a rivet on the other just take the bolt out and spin the bracket to the back and it will be out of the way
unless u want to drill or cut out that rivet
good luck

[HuskerHoe]

clean95, what about upfront? I know when I was decranked I was sitting on the bumpstops. Is there was to get more front travel out of these? Even after cutting bumpstops?

[clean454]

clean95, what about upfront? I know when I was decranked I was sitting on the bumpstops. Is there was to get more front travel out of these? Even after cutting bumpstops?

um well i have 22s and fender flares
and i dont have mine decranked all the way
but i did COMPLETELY cut out the bump stops bitch is low

---------- Post added at 09:22 PM ---------- Previous post was at 09:21 PM ----------

http://i376.photobucket.com/albums/oo205/clean95/img1268626906296.jpg
http://i376.photobucket.com/albums/oo205/clean95/img1268626905978.jpg

[Low97tahoE]

i havnt notched yet
it rides ok a little bouncy take the bump stop bracket out when u do the flip kit
the bracket has a bolt on one side and a rivet on the other just take the bolt out and spin the bracket to the back and it will be out of the way
unless u want to drill or cut out that rivet
good luck

i have already cut out the bumpstop bracket, i just cut into the head of the rivet a little and then hit it with the air chisel, then grinded it down flat, and punched it out. thanks for the info

[roadrageror]

well i just woke mine up again from hibrnation last weekend. 99denali 4x4 lowered 4" with 255/30/22 tires. a little bumpy but thats not a problem!http://www.tahoeyukonforum.com/forum/picture.php?albumid=105&pictureid=1743

[retorq]

http://photos-d.ak.fbcdn.net/hphotos-ak-ash1/hs467.ash1/25645_109222259092444_100000140127387_225972_40901 41_n.jpg

2 inch drop all around, spindles up front, shackles in the rear. 31x10.5 off road tires on stock rims all around. Scrapes in the front over HUGE holes, I will drop back to something closer to stock soon ... I live 2 miles off pavement and it gets REALLY bad sometimes so ... :D

Looking at some of these others I should have dropepd it a lil more.

[chaser0517]

http://i212.photobucket.com/albums/cc22/chaser0517/Blazer/Tahoe/CIMG0774.jpg
Belltech keys/cut bumpstops
3" shackles/overload removed til I can decide if I wanna run a flip kit.
Belltech Drop Shocks & 275/40r20s

---------- Post added at 12:39 PM ---------- Previous post was at 12:14 PM ----------

well i just woke mine up again from hibrnation last weekend. 99denali 4x4 lowered 4" with 255/30/22 tires. a little bumpy but thats not a problem!http://www.tahoeyukonforum.com/forum/picture.php?albumid=105&pictureid=1743
Seeing yours, I cannot wait to get my Denali clip on... Love the look of yours.

[992dr]

clean95,
Are those factory fender flairs?
Your truck looks sick.

[clean454]

clean95,
Are those factory fender flairs?
Your truck looks sick.

yea buddy
those are the sport flares

oh and thanks!

[kickitandholdit]

damn yal got some fresh hoes
i was gonna take mine in the direction chaser0517 did but lifted and mud tires but i wrecked it and got the one i got now.. i miss my old one :..(

[Low97tahoE]

low97, follow the rules!!!! Stats man!

Lol just joking. What are the details on the hoe though. 2wd I'm assuming? Tire and rim size?

www.cardomain.com/id/low97tahoe

i have a 2/4 drop...2" djm Spindles and 4" Belltech Leafs...this friday i am installing my new DJM 6" Flip kit, soon after i will get 2" Eibach coils for a 4/6 drop...i have 18" MB Express Wheels with 255/55/18, soon to be 255/50/18

yes its 2dr 2wd

[roadrageror]

[QUOTE

Seeing yours, I cannot wait to get my Denali clip on... Love the look of yours.[/QUOTE]

thanks man! make sure you get the cowl hood when you get your new front..may as well have it all painted at the same time. mine is a GOODMARK hood and it fit better than factory!

[lowlows18]

clean95 >> is your truck 4wheel drive or 2wheel drive??

[clean454]

clean95 >> is your truck 4wheel drive or 2wheel drive??

4x4 and its operational (works)
i used it the other day

[lowlows18]

4x4 and its operational (works)
i used it the other day

i have 22's on my truck too...my offset is 10...on 22x10..on 305/40....do u know wat yours are by any chance??

[clean454]

no i dont but im taking my wheels off today and ill look at them to see if i can fine off set
i need to get different rims and i could go lower my off set is huge 305 40 22

[99Bo-Tie]

hey lowered 4wd owners. How low can you go with torsion keys? and how does the front end ride? I really want to lower mine. and what is the best way to lower the rear? dont want to go to low. I have to haul my boat in the summer

[clean454]

u can go a inch or 2 with stock keys up front u need drop keys to lower the front more
if u tow how heavy is ur boat?
id just get shackles for the rear and i will drop u a 1-2 inches in the rear and just adjust the front keys down
if u wanna go lower ur prolly gunna need helper bags to support ur boat or whatever your towing

[99Bo-Tie]

ya the boat is pretty big. maybe 3000 pounds fully loaded? I have been wanting to get helper bags for some time anyways. I guess i can start with shackles and just crank down my stock keys. can i run helper bags with the shackle/hanger drop?

[clean454]

yea you can
look around online the helper bag does above the middle of the leaf spring to the frame

[99Bo-Tie]

i'll look into it. thanks clean95

[clean454]

no problem bro
i think stylin trucks .com google it
they have kits
and im sure some one will chime in with there helper bag set ups

[2drhoeon4s]

I have a 2" shackle in the rear and stock keys cranked down in the front.... thats it.... oh and I forgot the hundreds of pounds of stereo equipment and batteries in the back...haha

[Da90]

2wd dropped 2/4 with springs up front and shackle hanger kit in the rear. Was running 24" U2-85 with 295/35/24 tires(rubbed to much). Now Gino 498s with 255/30/24 Nitto Invo tires.
New rims
http://www.tahoeyukonforum.com/forum/picture.php?albumid=136&pictureid=7763
http://www.tahoeyukonforum.com/forum/picture.php?albumid=136&pictureid=6058
http://www.tahoeyukonforum.com/forum/picture.php?albumid=136&pictureid=6055
http://www.tahoeyukonforum.com/forum/picture.php?albumid=136&pictureid=6054

[AtomicHoe094]

nice truck Da90, got any more pics?

[Da90]

Thanks AtomicHoe! I have some old pics with the 20s but not to many with the drop kit and black rims. Check out http://www.cardomain.com/ride/2374648 there is more pics on that page.

[97yukon]

as far as helper bags go...i used mine to stiff'n my ride because of the 4inch drop springs. makes a huge differences and its still serves its purpose when im towing. i ran the switch for the compressor into the console. if you want pics ill take them towards the end of the week. you can see my set up pretty good from underneath the truck

[josetizapan]

Here's mine its a 99 denali and it has a 2/2 drop with beltech keys and shackles.

Pics are from my phone since i don't own a camara.

[Riocool]

Here my 99 2wd refreshed a bit. Picked this up 6 months ago and I have done a few things to it, just lowered on spindles and 1" spring to bring it down 3" up front. Tinted the front windows and swapped the wheels..

http://i829.photobucket.com/albums/zz211/riocool/P1060525.jpg

This is what it looked like when I picked it up in Jan. 2" drop on springs only.

http://i829.photobucket.com/albums/zz211/riocool/P1060155.jpg

Black is a killer to keep clean I told myself never again but I couldn't resist.:emotions122:

Same side.

http://i829.photobucket.com/albums/zz211/riocool/P1060530.jpg

Got some bell tech 2" springs and 4 bell tech street perf. shocks 2 months old for sale.

[txhoescrapin]

I got 20x8.5 with 35 series tires, 4/6 djm drop, flip kit in rear w/ notch and 2" spindles and 2" springs in front, DJM calmax shocks all around.
http://www.tahoeyukonforum.com/forum/picture.php?albumid=686&pictureid=6268
http://www.tahoeyukonforum.com/forum/picture.php?albumid=686&pictureid=6267
http://www.tahoeyukonforum.com/forum/picture.php?albumid=686&pictureid=6266
http://www.tahoeyukonforum.com/forum/picture.php?albumid=686&pictureid=6265
http://www.tahoeyukonforum.com/forum/picture.php?albumid=686&pictureid=6264
http://www.tahoeyukonforum.com/forum/picture.php?albumid=686&pictureid=6263
Notice frame 2" off ground
http://www.tahoeyukonforum.com/forum/picture.php?albumid=686&pictureid=6262
http://www.tahoeyukonforum.com/forum/picture.php?albumid=686&pictureid=6257

[2drhoeon4s]

looks good but you gotta get some meat on those rims. It looks like you are riding around on chrome spares with flat tires all around.

[Da90]

Bogsona99 that color, front clip & drop looks sick but I do agree with 2drhoeon4s. It needs some meat or some 22s!

[txhoescrapin]

LOL, I gues the pics don't show how low it really is, there is no room for "meat" or 22's, if I go any bigger the tire in back will rub top of fender well, and the front will be tucked and won't be able to turn. I do appreciate the input though. I actually like the 35 series tires, I gues to each is his own!

[Da90]

LOL, I gues the pics don't show how low it really is, there is no room for "meat" or 22's, if I go any bigger the tire in back will rub top of fender well, and the front will be tucked and won't be able to turn. I do appreciate the input though. I actually like the 35 series tires, I gues to each is his own!

When I had 20s on stock height I was running 285/50/20 just to fill the fender. They rubbed a little bit in the rear but could not notice and didn't tear up the tire. The front is where I noticed. I just cut out the inner lip of the fender and then slightly rolled the fender. Problem fixed. I'm running 2/4 on 295/35/24 I know it's not 4/6 but I think you could fit a little bigger tire and look a little better. :imo::happy160:

I don't have much room with the 2/4 on 24s
http://www.tahoeyukonforum.com/forum/picture.php?albumid=136&pictureid=6055

[txhoescrapin]

I understand your point, but a 2/4 is not in the same ballpark as a 4/6, travel is completely different, My fenders are completely rolled, I can promise you with 100% certainty that there is no way to get bigger tires, unless i get 18's and I don't want 18's. I appreciate that you don't like my tires, I actually like them alot.

[grnrpr68]

4/6 drop, flip kit in rear w/ notch and 2" spindles and 2" springs in front belltech shocks all around tried my 24's and they wont fit untill i bag it so i am looking for a decent priced and looking 22 for now if anyone can help out cool thanks http://i859.photobucket.com/albums/ab160/grnrpr68/my%20pics/0528002019.jpg

---------- Post added at 05:33 PM ---------- Previous post was at 05:32 PM ----------

http://i859.photobucket.com/albums/ab160/grnrpr68/my%20pics/0528002019a.jpg

---------- Post added at 05:33 PM ---------- Previous post was at 05:33 PM ----------

http://i859.photobucket.com/albums/ab160/grnrpr68/my%20pics/0528002018.jpg

[AtomicHoe094]

sick stance. what size tire you running? rubbing anywhere?

[Max]

2/2 belltech springs and shackles, 265/75/16 goodyear wrangler rt/s, stock limited wheels powdercoated gloss black...kinda miss my obs.

http://i2.photobucket.com/albums/y36/mcconditioner1/Tahoe/DSC00012.jpg

[AtomicHoe094]

you should buy it back max! if it was cheaper and lower miles id be all on it. he still asking 7 for it?

[97yukon]

here is mine with rollpan on, painted front bumper and hitch...i have a trailer hooked up in the pic actually. my phone took it so sorry if it suck lol.

[Da90]

here is mine with rollpan on, painted front bumper and hitch...i have a trailer hooked up in the pic actually. my phone took it so sorry if it suck lol.

Where did you get your rollpan and hitch?

[97yukon]

Where did you get your rollpan and hitch?

rollpan is sir michaels....i made the hitch

[Max]

you should buy it back max! if it was cheaper and lower miles id be all on it. he still asking 7 for it?

I think he's still asking 7 but I don't want it back, well maybe just the amp for the highs. I want a k5 or a chopped up TJ if I buy another truck but that thing would be sweet with an lq4 swap and some black nbs 20s 6lug converted...bit more drop too like 6/8 or something.

[AtomicHoe094]

ahah hell yea it would. but i hear ya.

[Da90]

rollpan is sir michaels....i made the hitch

Thanks, I thought about making a hitch just need to get a rollpan and get some measurements!

[97yukon]

Thanks, I thought about making a hitch just need to get a rollpan and get some measurements!

I have a thread on exactly how I did it with measurements and everything...its in tech stuff I believe check it out

Mike

[ewheelin]

2 -4 Belltech drop with 17 inch Panthers and 245-60 Michelins

[grnrpr68]

just put new shoes on my hoe has 6in lower kit but thinking about raising to a 3-5 kit so i dont rub we'll see http://i859.photobucket.com/albums/ab160/grnrpr68/my%20pics/0627001824d.jpg

[Da90]

Man that looks good!^^

[grnrpr68]

thanks

[bwood]

some pics of the hoe i painted

[1999hoe]

some updated pics

[ft541]

Its sitting on 22's lowered a little i dont know how much thou. Give me some ideas on how to clean it up a little i just berly got it, thinking bout taking off the chrome trim i dunno give me some ides plz


http://i1024.photobucket.com/albums/y310/ft541/082300_125201.jpg
http://i1024.photobucket.com/albums/y310/ft541/082100_155000.jpg

[992dr]

Finally got around to droppin the Hoe, nothing big but lower than stock hah.

http://i804.photobucket.com/albums/yy321/992dr/DSC02609.jpg

I'm pretty happy with this height, what a difference from stock. I do have my spindles and stock hangers "just in case" I feel need to go any lower, hah.

[Grocery Getter]

http://i244.photobucket.com/albums/gg5/LurpLurp/IMG_0356.jpg
http://i244.photobucket.com/albums/gg5/LurpLurp/IMG_0354.jpg
http://i244.photobucket.com/albums/gg5/LurpLurp/IMG_0353.jpg
http://i244.photobucket.com/albums/gg5/LurpLurp/IMG_0355.jpg

[texasmade]

Finally got around to droppin the Hoe, nothing big but lower than stock hah.

http://i804.photobucket.com/albums/yy321/992dr/DSC02609.jpg

I'm pretty happy with this height, what a difference from stock. I do have my spindles and stock hangers "just in case" I feel need to go any lower, hah.

^^ what setup do you have looks good

[Wilson!]

'99 2wd 2/3 drop on 22s with 305/40s
http://i161.photobucket.com/albums/t235/coprunr/ed00b25a.jpg
http://i161.photobucket.com/albums/t235/coprunr/579f723c.jpg

[992dr]

^^ what setup do you have looks good

Thanks man I appreciate it.
I have to look for my stock measurements to give you an idea of what the actual drop is. I had posted them in another forum somewhere.
I have Hotchkis coils (3" drop) with a spring isolater/spacer thats roughly an inch. The rear is a flip kit with helper bags. I have about 90lbs in the bags to get it to sit how you see it.

This is how it sat when I got it home, before the helper bags.

http://i804.photobucket.com/albums/yy321/992dr/Tahoe%20pics/04GTO025.jpg

[TigerEyz3]

Sam...
Digging the new stance. :D Shoot me some details on what all you did, if you don't mind. Also, any insight on the handling and ride differences associated with the suspension change? tire change?

[Da90]

Looks good Wilson! I like the wheels!

I'm going to be a pic whore....
http://www.tahoeyukonforum.com/forum/picture.php?albumid=136&pictureid=7911
http://www.tahoeyukonforum.com/forum/picture.php?albumid=136&pictureid=7900
http://www.tahoeyukonforum.com/forum/picture.php?albumid=136&pictureid=7901

[992dr]

Sam...
Digging the new stance. :D Shoot me some details on what all you did, if you don't mind. Also, any insight on the handling and ride differences associated with the suspension change? tire change?

Hi Robert,
Thanks man. The details, I have Hotchkis coils with my belltech coil spacer/isolater which is about an inch, maybe a little less. I think my front is about 2.5".
The rear is the flip with the included lift hanger, supposed to be 5.5" drop. I have just about 90lbs in the helpers to get it to sit as you see it. Honestly, the ride isnt that great. With the 90lbs in the bags the leafs/shocks arent doing much. In other words, its bouncy over bumps. I'm going to put my spindles on, with it aired out and the spindles, it would look pretty nice. Also, I'd be able to feel the suspension work. It'll be even better when I get new shocks.

This is a shot of it aired out. It gets a good 2.5" of lift aired up.
http://i804.photobucket.com/albums/yy321/992dr/DSC02622.jpg

[clean454]

the lowest she was http://i935.photobucket.com/albums/ad195/CCKustomz/IMG_4072.jpg

[Da90]

Clean you sig looks sick!

[clean454]

thanks bro i wish i woulda bagged her!

[D-Block]

Looks good Wilson! I like the wheels!

I'm going to be a pic whore....
http://www.tahoeyukonforum.com/forum/picture.php?albumid=136&pictureid=7911
http://www.tahoeyukonforum.com/forum/picture.php?albumid=136&pictureid=7900
http://www.tahoeyukonforum.com/forum/picture.php?albumid=136&pictureid=7901
You've inspired me pimp, I was gonna do 22's but now.... 4's all day. It's a good look 4real.

[FunFordCobra]

My Yukon. Had it since new in 1997 lol.
2/4 eibach spring/shackle kit, 22x9.5 Ultras 265/35 kuhmos.

[torrey1]

lowered 4inches with hanger shackle

[strungout2000]

Heres mine. Enjoy!

[D-Block]

lowered 4inches with hanger shackle
what size wheels?

[1999hoe]

Clearly this thread shod be stickied ..haha

[crazycrew]

2/4 belltech. 285/45/22

http://i616.photobucket.com/albums/tt242/brolandry/2011%20Tahoe/IMGP0376.jpg

http://i616.photobucket.com/albums/tt242/brolandry/2011%20Tahoe/5e66f1c4.jpg


Sent from my iPhone using Tapatalk

[SunlitComet]

what size wheels?


D-block,

What wheel do you have there with the indys on them?

[D-Block]

D-block,

What wheel do you have there with the indys on them?
They are MB Motoring wheels. They are for sale too. The tires are shot but the wheels are cool.

[ksipes]

I love the 24s but here in Colorado that just wouldnt fly with the way the roads are...

You've inspired me pimp, I was gonna do 22's but now.... 4's all day. It's a good look 4real.

[MaDeNMiAMi305]

this is my 99 2 door. just turned 90k miles, clean interior, cowl hood, 4/6 drop, and 2 15" re audio subs for bump. sfbd comming soon...

http://i693.photobucket.com/albums/vv299/MaDeNMiAMi305/untitled4-1.png

[1999hoe]

Damn we low hoes have surely come along

[AtomicHoe094]

Nice bump, forgot about this thread. Ill post up pictures once i get my lift shackles on and my shocks..

[TruckinMatt]

Here's my 99 z56 Retired Police Tahoe. It is lowered 3-5 with facgtory lowered springs plus spindles and hanger shackle kit. The nose has been swapped to a 99 Denali front end and the body kit is off of a 2000 Tahoe limited. She sits on 20 inch staggared Boss Wheels. Getting close to paint time, I'm thinking black and electric blue two tone. Any thoughts?

http://www.facebook.com/#!/photo.php?fbid=10150632836240547&set=a.10150409807735547.357859.749415546&type=1&theater

[AtomicHoe094]

Looks good Matt! Shave that antenna once you get some paint work going on!

Are you going to do a simple 2tone black on top and blue on bottom? or something else?
Really digging the truck, just not sure on the grille mesh.

[TruckinMatt]

Yeah I was thinking black on top and blue on bottom maybe with thin silver graphic between the two to break it up. Maybe something that looks like a 55 Chevy side mouldings or the deep plunging Buick v of the fifties in silver. The grille isn't simple mesh, it a Street Scene chromed speed grill. In person it looks way nicer than those guys who run gutter mesh.

---------- Post added at 08:09 PM ---------- Previous post was at 07:52 PM ----------

I planned on shaving the antenna two, I picked up a pioneer shark fin antenna that works for both sattellite and hd radio. I was thinking of shaving the rear door handles too and possibly running a rollpan while I was at it.

[malibulx]

Do not remember if I have posted here or not. 1999 2dr. Centerline 20's, Red LEDs inside, dual color front turn/park LEDs, helper air bags, Bell tech sway bars front and rear, billet grille and emblem.

[1999hoe]

^^^^I love that truck I even saved a pic to my phone

[carbed87]

heres my daily, coil and a half cut up front, shackles in rear (would like to do hangers)

http://i92.photobucket.com/albums/l14/carbed87/165c8504.jpg

http://i92.photobucket.com/albums/l14/carbed87/b9299646.jpg

heres my OT ride, no bags

http://i92.photobucket.com/albums/l14/carbed87/painted076.jpg

[Okcderek]

15655

[Okcderek]

15656
15657
15658
15659

[mitrooper]

Im new to the site thought i would add some pics of my 99 2wd ex mi state trooper tahoe. Lowered 4/6 bell tech has c-notch done. All shaved handles roll pan was welded in for the smooth look. sitting on 22" with 265/40r22 tires. Almost forgot it has a escalade front end with a billet grill.

http://i120.photobucket.com/albums/o166/yellercaprice82/20120511_194824.jpg

http://i120.photobucket.com/albums/o166/yellercaprice82/20120511_194845.jpg

http://i120.photobucket.com/albums/o166/yellercaprice82/imagejgtfuyhpeg_2.jpg

[DaRosa218]

[QUOTE=Really digging the truck, just not sure on the grille mesh.[/QUOTE]

I have a mesh grill as well on my Eski converted Blazer. They look much better when they are color matched to your truck. In my opinion Matt, I would paint your mesh when you paint the rest of your truck :)

http://i706.photobucket.com/albums/ww65/mikekristine218/59a731cb.jpg

http://i706.photobucket.com/albums/ww65/mikekristine218/fc0f81d4.jpg